SCSPerformance
Official Vendor
We normally do not stock these TRD centercaps, but we can help order them for you if needed.
Stealth Custom Series
- Thread starter GrantK
- Start date
We normally do not stock these TRD centercaps, but we can help order them for you if needed.
SCSPerformance
Official Vendor
Lol, let me know if I can help you in anyway. The great thing about our wheels is that you won't see any other makes driving around with the same set of wheels.
DannyLlama
Elite Member
Those stealth 6 in matte black are niiiiiiice!
How come no 18" option?!
How come no 18" option?!
Too bad the F-5s in 17inch won't happen - it seems impossible to find a clean design / five spoke silver wheel that will fit our 4Runners. If someone would make a 17 inch version of the old 5 spoke FJ80 wheels, I think they would make a killing from Toyota owners.
- Bob
fdmstng99
New member
Didn't think about that. Really into the Stealth 6.
SCSPerformance
Official Vendor
For the target market that we're after, 16s and 17s seems to be the most sought after sizes so that's what we're starting with. Hopefully, as we grow, we can expand the lineup and add more sizes.
Yes, our wheels are Toyota specific. They're hub-centric and made to fit our trucks perfectly.
Each size requires its own mold so instead of investing in the same design in a different size, our plan to introduce a third model by the end of next year if things go as plan.
The offset is inline with most of the 17x9 wheels that most people are using. The great thing about our wheel is that at 8.5", most 265s will be acceptable on this size. Whereas on a 9" wheel, you will have to jump up to 275/285 based on the tire manufacturer's recommended fitment guide.
gadgetguy1288
New member
I love that look! Hopefully I will be able to order some of these when I get my lift.
Pardon my ignorance though, Would these wheels require spacers or anything like that when used on a 5th gen with a 2" lift and 275's?
Pardon my ignorance though, Would these wheels require spacers or anything like that when used on a 5th gen with a 2" lift and 275's?
SCSPerformance
Official Vendor
No spacers needed unless you want the wheel/tire to really stick out pass the fenders. This will cause a lot of small rocks/dirt to kickup onto the side of the truck. You should be able to fit a 275/70/17 with minimal plastic trimming depending on the tire brand as some are a little wider than others.
SCSPerformance
Official Vendor
Thanks! I like answering questions so don't worry about asking a lot. That's what I'm here for.
I'm assuming you are referring to the F-5 model with your questions. The F-5 is 16x8 with 4.5"BS/0 offset. This model is made in Thailand, but the mother company is based in Taiwan. Our other model, the Stealth 6 is made in Taiwan. For the F-5, the load rating is 955kg/2100lbs and yes our wheels are cast aluminum alloy. As of right now, we do not have plans to produce the F-5 in a 17" version.
Here's a couple of shots on a 3rd gen.
blue dog
New member
Thanks! I like answering questions so don't worry about asking a lot. That's what I'm here for.
I'm assuming you are referring to the F-5 model with your questions. The F-5 is 16x8 with 4.5"BS/0 offset. This model is made in Thailand, but the mother company is based in Taiwan. Our other model, the Stealth 6 is made in Taiwan. For the F-5, the load rating is 955kg/2100lbs and yes our wheels are cast aluminum alloy. As of right now, we do not have plans to produce the F-5 in a 17" version.
Here's a couple of shots on a 3rd gen.
Thanxs for the quick reply, they look good on the 3rd gen.
SCSPerformance
Official Vendor
New customer pics: F-5 Matte Bronze on a 1st gen Tacoma
Last edited:
fdmstng99
New member
Thanks! I like answering questions so don't worry about asking a lot. That's what I'm here for.
I'm assuming you are referring to the F-5 model with your questions. The F-5 is 16x8 with 4.5"BS/0 offset. This model is made in Thailand, but the mother company is based in Taiwan. Our other model, the Stealth 6 is made in Taiwan. For the F-5, the load rating is 955kg/2100lbs and yes our wheels are cast aluminum alloy. As of right now, we do not have plans to produce the F-5 in a 17" version.
Here's a couple of shots on a 3rd gen.
Looks like those wheels were meant for that 4Runner, looks great.
SCSPerformance
Official Vendor
I agree. I think with some aggressive MT tires and a mild lift, the 3rd gen 4Runner can look pretty tough with our F-5 wheels.
SCSPerformance
Official Vendor
Another 4Runner stud:tongue:.
5th Gen 4Runner
5th Gen 4Runner
FactoryRide
New member
That looks awesome!!
EDIT: Are those the gunmetal ones??
EDIT: Are those the gunmetal ones??
SCSPerformance
Official Vendor
Thanks and yes, the finish is matte gunmetal.
Thanks, let me know when you're ready for a set.
