TG Ifs eliminator questions

[Hyde802]

You can use the TG shock towers, but should plate the frame where they attach and brace them well.

Back to a kit.. https://www.ruffstuffspecialties.com/catalog/3LINKKT.html

Good read : Front Suspension Technology Link Basics Part 2 - Off-Road Magazine

 

[nevada]

if this is your first conversion, I suggest just sticking with a standard SAS.

get 3" springs if you want to keep it lower.

spring under is going to add an extra level of difficulty.
a link system is much more difficult, and expensive.

 

[broken wrench]

I've explore the option of a 3 link a little. What would be a recommended coilover to use and where/how would I mount them, I imagine any regular shock tower is out of the question.

you can use a regular shock mount but I would not , I tend to make my mounts wide as I can with scab plates and frame reinforcement. then add bracing to it, all pro use to offer a nice plate one for there taco link kit(not sure if they still do).

I would guess a12 or 14" coil over

 

[Footofgod]

opcorn:

Just glad this is happening! Now we need to get Riff Raff to do it.

 

[KidVermicious]

You're a bad influence.

 

[broken wrench]

do the SAS, because I want your ARB :evil:

here are the relocation plates I spoke of, still have room for another hole if needed.

 

[Robmills72]

do the SAS, because I want your ARB :evil:

here are the relocation plates I spoke of, still have room for another hole if needed.

Still looking into it, it will have to be after Jambo, and even then I might put that money toward a 3.4 swap.