The Grocery Getter: Mrs. Bigfish's 2008 Sport Edition V6 4wd

[fayewong]

The Bosch blades were $16 each at Wal-Mart. The best price I could find on OEM blades was $20 & $19 for L+R respectively through Camelback Toyota Parts.

You are correct that after installing OEM blades, one could simply replace the rubber inserts at $6/$4 for L+R, but then over time I'd still be left with a faded/oxidized, worn out looking wiper frame (the sun is hard on the paint here in the SW). The windshield wipers are something that I have to look at all the time, so when the finish on the frame starts to go, it bugs me. Taking the time to disassemble and paint the frame just isn't worth it. I'd rather spend the extra $20 and do a 30 second swap per side to a fresh part.

All that being said, if I'm replacing the whole blade anyway, I'd rather go with a high end blade that not only performs better than stock, but looks more modern while doing so.

I can't speak for everyone, but those are my reasons.

Ok, that makes a lot more sense. I get OCD with stuff too. So you made me better understand from a different viewpoint. Thanks. :nod:

 

[adkfinn]

I'm still trying to figure out which picture you are looking at where the marker light is out. In the last two pictures of the front end that I posted it looks like the PS running light/blinker is out (maybe that is what you meant), but I checked and they are both functional (bright lighting on the PS front corner in the photo made it look like it was out I guess). However, the DS marker light is definitely out, so thanks for giving me a reason to take a look.

Yes, it iwas the last pic in post #32 that I noticed, but I see what you are saying about the brightness making it only appear to be out. Cheers!

 

[BigFishAllDay]

The following update to this thread contains some hardcore stuff... prepare yourself....









































I finally found the right tissue box for that dang spot.

I purchased a 10 pack because we have snot nosed kids. Look for "Kleenex Junior" on Amazon if you want to get some for yourself.

No more of this sub-standard business...

Also, I threw in a few more LEDs (parking lights and reverse lights). Thanks to [MENTION=143130]adkfinn[/MENTION] for the tip on these bulbs. They look like quality bulbs, and have substantial heat sinks.

Link to parking lights > JDM ASTAR 194 LED Bulbs, Amber Yellow

The amber LEDs are a little long, but do not contact the lens of the headlight. They are very bright, but due to the increased length of the bulb the amber light fills the entire housing, while the light from the shorter incandescent bulbs was contained to the lower outside corner. The Mrs. likes them, so they stay.

Incandescent on photo left, LED on the right

The reverse lights are beefy. They look twice as bright as the stock 921 bulbs to my completely un-calibrated eye.

Link to reverse lights > JDM ASTAR 800 lumens 921 PX Chipsets LED Bulbs For Backup Reverse Lights

Before...

After...

Side by side...

 

[gm350reratliff]

That's amazing! All these years I've never been able to find a box that fit right. Going to order some now.

 

[adkfinn]

The following update to this thread contains some hardcore stuff... prepare yourself....

Looking good. I am using the same reverse lights also (after trying three other "upgrade" bulbs of different styles with no success). They are brighter than stock for sure, but I am still probably going to add some aux reverse lights at some point.

 

[BigFishAllDay]

That's amazing! All these years I've never been able to find a box that fit right. Going to order some now.

Those Kleenex Jr. tissue boxes will change your life.

Looking good. I am using the same reverse lights also (after trying three other "upgrade" bulbs of different styles with no success). They are brighter than stock for sure, but I am still probably going to add some aux reverse lights at some point.

I've got some cheap amazon LED pods on the back of my 3rd gen that come on with the reverse lights via a relay. They make a big difference when backing up at night, especially with the limited visibility caused by the tire carrier. IMO, the smaller flush mount LEDs are a pretty slick option for 4th gens with a stock rear bumper.



Just to add value to this post... another picture!

 

[Scramble]

Love the snot nose kid mod! The 4th gen is coming along nicely & will be perfect for when your kids are ready for soccer! :rofl:

 

[Legender]

This is a really nice build thread. Really appreciate you taking the time to show details and provide links. Already have some new LEDs ordered thanks to your documentation efforts.

 

[BigFishAllDay]

Love the snot nose kid mod! The 4th gen is coming along nicely & will be perfect for when your kids are ready for soccer!

It definitely beats finding a pile of boogers in the car seat. Someday the kids will be on top of it and flick them out the window like Dad.

This is a really nice build thread. Really appreciate you taking the time to show details and provide links. Already have some new LEDs ordered thanks to your documentation efforts.

No problem. I'm glad you found the information useful and took the time post in the thread. It makes it worthwhile to know that people are getting some use out of the info.

 

[HCWatson997]

My wife has always liked the LED dome lights in my 3rd gen, and with all the interior lighting in the 4th gen, it seemed like a natural choice to give LEDs a try.

Parts list:

VANITY_2_W_5K - VLEDs Vanity Bulbs x 2
74_3_W_5K - VLEDs Glove Box Bulb
194_4_RB_5K_LL-CO - VLEDs License Plate Bulb x 2
Yorkim T10 194 Bulbs x 6 (Map Lights, Door Lights)
Ebay 48 SMD LED Panels w/adapters x 2 (Dome Lights)
http://i1271.photobucket.com/albums/jj627/bfadalbumdos/Babers%202008%20T4R/P3271824_zpstw8aeyij.jpg~original[/IMG]

Any idea on how much the interior leds cost all together?

Also this will be a lot harder to remember, but general cost of your suspension upgrades minus the tires?

 

[BigFishAllDay]

Any idea on how much the interior leds cost all together?

Also this will be a lot harder to remember, but general cost of your suspension upgrades minus the tires?

$275 for all 4 shocks (forum classifieds, local)
$200 for all 4 coils (c-list)
$26 for the KYB top mounts (amazon)
$20 for the OME trim packer (4WheelParts)
$0 for the Toytec top plate spacer (friend gave it to me)
$0 for the bumpstops (purchased prior for another vehicle)

As for the LEDs, I think it was $40-50 total. I purchased closeout bulbs from VLEDs and the Yorkims are $10 on Amazon. The 48 LED dome panels I bought off Ebay as a 5 pack years ago... maybe $10-15 there.

 

[HCWatson997]

$275 for all 4 shocks (forum classifieds, local)
$200 for all 4 coils (c-list)
$26 for the KYB top mounts (amazon)
$20 for the OME trim packer (4WheelParts)
$0 for the Toytec top plate spacer (friend gave it to me)
$0 for the bumpstops (purchased prior for another vehicle)

As for the LEDs, I think it was $40-50 total. I purchased closeout bulbs from VLEDs and the Yorkims are $10 on Amazon. The 48 LED dome panels I bought off Ebay as a 5 pack years ago... maybe $10-15 there.

Now if only I could find that kind of steal for those parts...In Arkansas there isn't that much on the used market that I've seen.

 

[HCWatson997]

$275 for all 4 shocks (forum classifieds, local)
$200 for all 4 coils (c-list)
$26 for the KYB top mounts (amazon)
$20 for the OME trim packer (4WheelParts)
$0 for the Toytec top plate spacer (friend gave it to me)
$0 for the bumpstops (purchased prior for another vehicle)

As for the LEDs, I think it was $40-50 total. I purchased closeout bulbs from VLEDs and the Yorkims are $10 on Amazon. The 48 LED dome panels I bought off Ebay as a 5 pack years ago... maybe $10-15 there.

I love how your rig sits and keep looking for some options. I have XREAS and a front coil spacer but want to go higher. Only a 2wd though so just for looks LOL

 

[Scramble]

Now if only I could find that kind of steal for those parts...In Arkansas there isn't that much on the used market that I've seen.

Did you ever see Breaking Bad? There's always "hot" stuff in the used NM market. :whoo:

 

[BigFishAllDay]

Now if only I could find that kind of steal for those parts...In Arkansas there isn't that much on the used market that I've seen.

I love how your rig sits and keep looking for some options. I have XREAS and a front coil spacer but want to go higher. Only a 2wd though so just for looks LOL

If I'm buying something, I always try to get it at a discount. Hunting down the deals has become kind of a pastime for me. I surf craigslist for Toyota parts daily and deals similar to the ones I got have not come up again since.

Thanks for the compliments on the rig, and for following the thread. There's nothing wrong with fixing up your 2wd just for looks. Many of the guys who dump thousands into their 4wds are doing it just for looks too. Mall crawlers are thick on this forum. Case in point, this build. I can admit it, it's all good. I just like that my wife drives a nicer 4Runner than 99% of the male owners in my area, and I get to have fun tinkering with it.

Did you ever see Breaking Bad? There's always "hot" stuff in the used NM market. :whoo:

Yep. Hot green chile elk jerky... hot water heaters... beat up hot tubs... and hot local singles.

 

[HCWatson997]

If I'm buying something, I always try to get it at a discount. Hunting down the deals has become kind of a pastime for me. I surf craigslist for Toyota parts daily and deals similar to the ones I got have not come up again since.

Thanks for the compliments on the rig, and for following the thread. There's nothing wrong with fixing up your 2wd just for looks. Many of the guys who dump thousands into their 4wds are doing it just for looks too. Mall crawlers are thick on this forum. Case in point, this build. I can admit it, it's all good. I just like that my wife drives a nicer 4Runner than 99% of the male owners in my area, and I get to have fun tinkering with it.



Yep. Hot green chile elk jerky... hot water heaters... beat up hot tubs... and hot local singles.

Yeah and ever since my roommate got a 4th gen as well, I feel like we're secretly trying to out-do each other now on what we can do to ours...the problem is we're broke a** college students

HA just don't go for singles that are red heads, hairdressers, or anybody named Tiffany...I hope somebody at least gets that reference...its a joke, nothing hateful intended

 

[BigFishAllDay]

Wife zone chart, good stuff... should be mandatory viewing for college freshman males.

My kid goes to preschool with the daughter of a guy I happen to know from high school. His wife is named Tiffany, and she's a redhead... not sure if she ever worked as a hairdresser, though.

 

[BigFishAllDay]

So, enough BS for now.

I made a grille for the Grocery Getter. I'll go ahead and say it... I'll bet this grille could go head to head with any on the forum for fit, finish, and attention to detail. It's my 4th go at it, so I'm getting pretty dialed on the process.

I used a stock emblem painted graphite for now, but that may get swapped for something else or, at minimum, see a color change.

There are a lot of tips and tricks I learned in the process that I'd be happy to share, but I'm not going to waste the time because either nobody reads the 4th gen section, or nobody cares, I'm not sure.

[MENTION=116470]Tyler James Inc[/MENTION] [MENTION=7105]Scramble[/MENTION] @Anti-Satoshi-Club : Satoshi for life, beeyotch!

 

[Legender]

That looks really sharp. Nice job.

 

[Scramble]

Holy Cat Scratch Spam posts Batman! Reported!

The Satochi looks good. I hate the ones that are all Black which makes it look like a big Black hole in the front of your truck.