TRD Pro with 6112 coils (pics inside)

[Bayou_Pro]

Where did you pick up your springs only, all the searches return complete sets. Or did you get them off another member like the OP?


Sent from my iPhone using Tapatalk

Yes I bought them off of a member that upgraded to 650#. There was another set for sale in the classified the other day. There is also a member selling a set of 14"X3" 600# TRD spring too. They are from an FJ ultimate trail kit. I would have gotten those if I would have seen them first, for the simple fact that they are red.


Sent from my iPhone using Tapatalk

 

[Bayou_Pro]

Youre in Vegas? Come by my shop and I have a set of 600x13 takeoffs Id sell to ya for $80. They are Eibach brand. :reddance:

I really wanted to get those from you but the 13" springs won't give you the 2" lift that the 14" will.


Sent from my iPhone using Tapatalk

 

[DeserT4R]

Youre in Vegas? Come by my shop and I have a set of 600x13 takeoffs Id sell to ya for $80. They are Eibach brand. :reddance:

I am in vegas but looking for the 14” for the added lift. These rocks out here make the trails a little rough. Do you have the t13s?


Sent from my iPhone using Tapatalk

 

[Battle Born Offroad]

We can get those too, but they are more than double in cost as they arent take off springs. To achieve what OP did, all you need is the standard 6112 springs, for 2" of lift you are probably best off with the new Bilstein 53-291387 650x14 springs - BILSTEIN 6112 / 8112 Heavy Rate Spring Upgrade Now Available! PN 53-291387

 

[DeserT4R]

We can get those too, but they are more than double in cost as they arent take off springs. To achieve what OP did, all you need is the standard 6112 springs, for 2" of lift you are probably best off with the new Bilstein 53-291387 650x14 springs - BILSTEIN 6112 / 8112 Heavy Rate Spring Upgrade Now Available! PN 53-291387

Don’t you think that would be a bit stiff with no added weight?


Sent from my iPhone using Tapatalk

 

[speedyglx]

Don’t you think that would be a bit stiff with no added weight?


Sent from my iPhone using Tapatalk

650 will give you approximately 3.25in of lift over stock non TRD Pro 4runner or approximately 2.25in over a TRD Pro. You will most likely need new upper control arms. It will most likely be a lot stiffer than what you have on now.

 

[DeserT4R]

650 will give you approximately 3.25in of lift over stock non TRD Pro 4runner or approximately 2.25in over a TRD Pro. You will most likely need new upper control arms. It will most likely be a lot stiffer than what you have on now.

Yeah, that’s more than what I want to do right now... the small increase in price for the 600 3x14 is much better than the cost of UCAs.


Sent from my iPhone using Tapatalk

 

[2016 4Runner SR5]

I don't understand. You said you put 6112 on your TRD Pro which I assuming you took the OEM TRD Pro Bilsteins off. Were the 6112 not adjustable height?

The stock 6112 shocks do have clip settings so hopefully he did this correctly. They have only 2 settings but DS belongs on the top clip and PS belongs on the lower clip.

 

[jlaviano]

P/N for Coils

Hey [MENTION=75956]speedyglx[/MENTION] & [MENTION=303056]Bayou_Pro[/MENTION]

For reference, what is the p/n for the bilstein coils you are using?
E4-FD1-Y005B29?

 

[Bayou_Pro]

Hey [MENTION=75956]speedyglx[/MENTION] & [MENTION=303056]Bayou_Pro[/MENTION]



For reference, what is the p/n for the bilstein coils you are using?

E4-FD1-Y005B29?

Yep.

Sent from my iPhone using Tapatalk

 

[aelarson]

[MENTION=75956]speedyglx[/MENTION] are you still enjoying this setup? Thinking about pulling the trigger. Economical lift while still looking good, not too over the top!

 

[Photog5thGen]

This is exactly what I would like to do for my 2016 Pro.

I would like to ask who did the work for you. Thanks!

 

[jlaviano]

Just received the 14x3 600lb coils from a 6112 kit, I will be replacing the stock pro coils and the toytec spacers from the pro lift kit with these coils. I’ll post my results in a few weeks after the install.

 

[speedyglx]

[MENTION=75956]speedyglx[/MENTION] are you still enjoying this setup? Thinking about pulling the trigger. Economical lift while still looking good, not too over the top!

Yes still loving this set up. Zero issues. I would it again if I had to.

 

[CF_Machete]

Yes still loving this set up. Zero issues. I would it again if I had to.

How much were the 6112 coils shipped? I have a set in my garage that getting dusty. No clue how to price them out.

 

[aelarson]

Yes still loving this set up. Zero issues. I would it again if I had to.

That’s great to hear. I know you’re on 285’s, but did you have any driving experience on the stock sized tires? How was your fuel economy?

 

[aelarson]

How much were the 6112 coils shipped? I have a set in my garage that getting dusty. No clue how to price them out.

There are a set for sale in the classifieds for $100, buyer pays shipping.

 

[DeserT4R]

How much were the 6112 coils shipped? I have a set in my garage that getting dusty. No clue how to price them out.

Sent you a PM. If the going rate is $100 and your willing to ship, let me know!


Sent from my iPhone using Tapatalk

 

[speedyglx]

I got mine at a good price but I believe $100 is pretty fair if they were used.

 

[speedyglx]

That’s great to hear. I know you’re on 285’s, but did you have any driving experience on the stock sized tires? How was your fuel economy?

I only drove it on stock tire for about 15 miles. Not much to answer your question.