Rotated my Transmission Cooler and have it secured. Between my winch, that, horns, and my amber lights I want to put in there, I'm running out of space. Wonder if anyone's ever build a grill from scratch to give themselves more room????
20170521_145628 by
psraff, on Flickr
Anyway, moving on. Went to finish stripping old wiring out and discovered my insulation under my carpet was wet (In front of driver seat). Lifted it up and saw this:
20170521_131926 by
psraff, on Flickr
Got the pressure washer out and started to explore. One was that little plug. That was pretty easy to find, but that wouldn't explain most of the rust in the corner. So I removed the sound deadener and did some more.
20170521_134325 by
psraff, on Flickr
Turns out, it was my own fault!!!! :mad2: There's a grommet up above in the firewall that I ran wires through for years for everything. It's gotten weak and now every time it rains or I wash it, water will come off the windshield, into the engine bay, down the firewall, and right into that grommet. It doesn't take much because that carpet insulation acts like a sponge and soaks it up forever.
So out comes the Air Grinder and the Vacuum. Got it all cleaned up with some Metal Prep as well. Very little cancer, still solid.
20170521_144203 by
psraff, on Flickr
20170521_144230 by
psraff, on Flickr
Rust Converter.
20170521_145552 by
psraff, on Flickr
I'll let it dry overnight and hope my insulation is dry as well. I'll silicone the grommet and plug and keep an eye on everything. Hope those are the only two areas I'm leaking.
BTW: I did check my sunroof drain tube. It was dry and I hit it with the air compressor and watched dust come out the top. Felt air come out at the sun roof so that's not plugged or disconnected.