buckeye4runner08
New member
Just rolled this over on the odo this morning. Had to take a pic
What did you do with your 4runner today?
- Thread starter NorthGa4R
- Start date
andy2008
New member
Last edited:
momo.75
Registered User
I really appreciate that. Luckily we are well north of all that mess. I know several people that live down there that have lost everything so just keep praying for all those families down there.
Tooltime19
New member
Keep us posted on the performance of the FOX DSC's. I have the 5100's too and am thinking of upgrading to the FOX's with the DSC or the Kings.
97BlackAckCL
Elite Member
Ordered a new painted bumper off ebay, mine got messed up shortly after I put the new one on because some idiot cut me off on wet roads and I'm sick of looking at the flakey paint :tsk:
Steel bumper with spikes would help more.
Sent from the drivers seat of my 05 4runner.
97BlackAckCL
Elite Member
I hear ya, I would love a steel bumper but it's not needed for a daily driver. I've stopped myself for years from getting any kind of push bumper because I would be tempted to use it!
That's my problem! I don't want the weight or the desire to push... Erm draft anyone out of my way! Lmfao.
Sent from the drivers seat of my 05 4runner.
cblocker
New member
I fear that I'd just stop using my brakes all together....plow my way to work.
Who did you buy it from? MBI auto? I have been thinking of buying a pre painted rear bumper, but was unsure of the quality.
- had the front two windows tinted to match the OEM rear tint; 50% tint on the entire windshield
- pulled the front mudflaps
- installed amber LEDs in the front DRL/turn signal
ANDDD
ordered 17x8.5 matte dark bronze SCS F5 and 275/70 BFG AT KO2s. will be pulling the OE running boards off when the truck is in the air for adjusting the front suspension higher and doing the wheels/tires.
very excited. ran 16x8 scs f5 and 265/75 ko2s on my old '15 tacoma. figure since I've got the v8 now, i can go bigger
- pulled the front mudflaps
- installed amber LEDs in the front DRL/turn signal
ANDDD
ordered 17x8.5 matte dark bronze SCS F5 and 275/70 BFG AT KO2s. will be pulling the OE running boards off when the truck is in the air for adjusting the front suspension higher and doing the wheels/tires.
very excited. ran 16x8 scs f5 and 265/75 ko2s on my old '15 tacoma. figure since I've got the v8 now, i can go bigger
Billynath1988
Senior Member
successfully passed NYS inspection.. wooooo lol
Changing the oil tomorrow
Changing the oil tomorrow
blackoutt
New member
As a former yankee F THAT! Indiana has literally zero inspection, which also has it's downfalls for some of the crap we see on the roads. The worst is when you have a stupid evap code and can't pass, just waiting til that one time you drive it past all the readiness checks and the light stays off for a few miles get it in now! How much do they cost now a days? Used to be $21 at the highest I remember. Congrats on the pass lol.
Billynath1988
Senior Member
37 dollars lol
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
A10MileHusker
New member
So on my 3rd attempt I FINALLY got the bolt out of my lower shock mount on my front coilovers.
This process has been a PITA but its out and my new bushings are in.
:bigok:
Here is how bad the bolt and heim joints were.
This process has been a PITA but its out and my new bushings are in.
:bigok:
Here is how bad the bolt and heim joints were.
Here in Alabama, it's less than that lol. If your $%^t will crank, you're good to go!
So on my 3rd attempt I FINALLY got the bolt out of my lower shock mount on my front coilovers.
This process has been a PITA but its out and my new bushings are in.
:bigok:
Here is how bad the bolt and heim joints were.
Sent from the drivers seat of my 05 4runner.
Similar threads
