WhiteKnight Build - (Smallfry's rebuild)
- Thread starter smallfry
- Start date
smallfry
New member
Finally, got around to installing the new rear lower links tonight. Install was pretty simple and straight foward.
Old Links, both of which have a slight bend to them
Passenger side links (old link vs the new link)
Driver's side has more of a bend to it (old link vs. a straight stock link)
Installed
Old Links, both of which have a slight bend to them
Passenger side links (old link vs the new link)
Driver's side has more of a bend to it (old link vs. a straight stock link)
Installed
Desert Fox
New member
Did you get the seal leak fixed?
smallfry
New member
Ya, I got it fixed earlier this week - two seals decided to blow out between the diff housing and the axle tube.
4Running Daily
New member
Which part of the Broken Arrow trail? Any pics?
Desert Fox
New member
Sorry you broke it on the trail. You are in beautiful country.
Hopefully you have someone to help you out there.
If not go to the FJ Cruiser forum and send a PM to WIKID. He may be able to get you some help.
Hopefully you have someone to help you out there.
If not go to the FJ Cruiser forum and send a PM to WIKID. He may be able to get you some help.
Last edited:
MountainBiker
Member
Ouch!
I did that road in my Subaru Forester, really!
Unfortunately, the pictures seem to have been removed. It was definitely the limit of my modified Forester!
Broken Arrow Trail, 23 Nov 07 w/ special guest MountainBiker! - Expedition Portal
Desert Fox
New member
Probably got broke on one of the Colorado trails and just seperated in Arizona
smallfry
New member
Ya, it's pretty sad that it broke on that trail. It would've been sadder to have a Jeep pull me off the trial.
I don't know everything looked fine before I left. I just on a hill portion with a small ledge and as soon as I clear I hear a 'pop'. Stopped at the end of the trail and see grease everywhere.
SCRunner12
New member
Nice, anything happen with the transmission?
smallfry
New member
No. Couldn't find any leaks anywhere. My only guess is that it came out of the breather.
smallfry
New member
Couple of things have been placed on order:
Shrockworks front bumper, single hoop (thought about color matching it to my 4runner but trying to match a pearl white over a standard white would be a pain and touching up a black bumper would be easier.)
PIAA 510 fog lights
Lightforce 170 lights
Weathertech floor mats
New LBJ and LCA (the bushings are shot)
Shrockworks front bumper, single hoop (thought about color matching it to my 4runner but trying to match a pearl white over a standard white would be a pain and touching up a black bumper would be easier.)
PIAA 510 fog lights
Lightforce 170 lights
Weathertech floor mats
New LBJ and LCA (the bushings are shot)
Last edited:
smallfry
New member
Thought I try something different for the fog light switch via FJ Cruiser fog light switch
Got the kit from TRDparts4u accessories for your Toyota car, truck, 4x4 or SUV with Genuine Toyota and offroad specialty parts. type in fj-fogsw into the search bar and it will pull it up.
Got the kit from TRDparts4u accessories for your Toyota car, truck, 4x4 or SUV with Genuine Toyota and offroad specialty parts. type in fj-fogsw into the search bar and it will pull it up.
