Windshield Wiper recommendations

I bought the Rain-X silicone endurance premium and the driver side doesn’t cut the water with a nice edge on the top arc of the glass. The passenger side does fine. I don’t know if I have a bad blade, but I’m not going to buy them again.
 
I replace mine yearly, just the rubber inserts in the OEM blades.
Latest part #'s for just the rubber refills:
Left: 85214-06140
Right: 85214-0E140
Rear: 85214-42040

But with my old 4R I used the Bosch Icons.
 
OEM refills from the Toyota dealer in your stock holders. Inexpensive, easy to change, and work better than others I've tried.

This (and others) I do refills too, super cheap, takes fifteen minutes, I get a couple years out of them, also it’s the only way I have found to replace the rear wiper blade.
 
The Costco rainx ones worked well on my other trucks there is no reason why they won't on my runner

And the price is right on sale for the pair less than $20
 
ProjectFarm did a review of all the top models a year ago: Which Windshield Wiper Blade is Best? Let's find out! Michelin, PIAA, Bosch, AC Delco, & Aero - YouTube.

He also just recently did a one year follow up after them being left out in the UV: Best Windshield Wiper Blade after 1 Year of UV? Bosch Icon vs Rain-X, PIAA, Trico, Valeo, AERO - YouTube

I trust almost everything he says and always check for one of his videos before purchasing anything new.

Bosch Icon FTW.
 
My search-fu fails me. I have no doubts there's posts on this, but I couldn't find them, so apologies.

Ok, who likes what? Brands, styles, alternative sizes over OEM?

Buy OEM from the cheapest online dealer you can. Beware of Chinese crap and other offshore pseudo “OEM” rubbish.
 
I like the look of the stock wiper blade holders, and it's pretty cheap and easy to use OEM refills. Works for me. On the other hand, it hardly ever rains in Southern California.
 
The project farm review on em makes them look pretty promising.

Yes. The conclusion of the 10+ minute Project Farm YouTube video review of the test results of all those wiper blades was that the Bosch Icons worked best.
It seems that the most important aging factor that deteriorates the rubber is UV light.
 
Yes. The conclusion of the 10+ minute Project Farm YouTube video review of the test results of all those wiper blades was that the Bosch Icons worked best.
It seems that the most important aging factor that deteriorates the rubber is UV light.

Yea was thinking about getting the PIAA ones but interested now in the Bosch. Or I could just get the OEM inserts lol
 
This (and others) I do refills too, super cheap, takes fifteen minutes, I get a couple years out of them, also it’s the only way I have found to replace the rear wiper blade.

I was hoping someone would bring up the rear wiper blade.
The dealer here doesn't stock them. They will order them for you.
You would think they would because its an odd size and I have yet to find that size at a parts store.
I found them online from a dealer in Arizona.
Changing this blade is Pain.
 
Reviews on the Rain-X wipers are always mixed because no one realizes or specifies which of the several different model of Rain-X blade they used. They make everything from basic cheap conventional to nice silicone ones.

That being said, I put a said of Latitude 2 in 1 blades on my dad's car and within a few weeks they were replaced. Worst blades I've ever had.

Many many many years ago, when PIAA headquarters was just a blocks from my work, I ran their Silicone blades on my Honda and they were incredible. I believe I had them 2 years before selling the car with them. Worked like new at that time.

I then put a set on my Jeep which saw a lot of off road dirt, mud, dust, etc. on the windshield. I'm also in NW Oregon so we get our share of rain to use wipers on. After a few years of that abuse, and 50k miles or so, they started to wear out so I replaced them. Rolled/totalled that rig shortly after.

I bought a truck that had Bosch Icons on it and they worked great. After a year I replaced them but should have stuck with the Icons again. I have never bought another set simply because I'm always trying the new new.

On my 4Runner I put a set of Rain-x non silicone wipers on and they were ok. Lasted one winter and I replaced with Scrubblades. The Scrubblades aren't as good as the PIAA in pure rain but they shine when it comes to getting bugs and crud off the windshield. The cleaning ability makes them a contender. I get about a year out of a set of Scrubblades and that is with a little abuse. I run them across ice to clear it, scrub bugs in hot weather, all the things you shouldn't do. I've run nothing but them since.
 
I replace mine yearly, just the rubber inserts in the OEM blades.
Latest part #'s for just the rubber refills:
Left: 85214-06140
Right: 85214-0E140
Rear: 85214-42040

But with my old 4R I used the Bosch Icons.

Thanks for these part numbers! Are you sure about the number for the Right blade, though? I can't find anything that says that's the correct one for a 4Runner front. Should it maybe be 85214-53090 or 85214-06130?
 
Thanks for these part numbers! Are you sure about the number for the Right blade, though? I can't find anything that says that's the correct one for a 4Runner front. Should it maybe be 85214-53090 or 85214-06130?

The wiper inserts part numbers have changed once or twice over the years. 85214-06130 and 85214-53090 are the older numbers. Here’s a snap of the Camelback Toyota online part store and from Toyota Parts Deal showing the current part number 85214-0E140.

In a year or two don’t be surprised if the numbers change again.
 

Attachments

  • 8EA5F75F-C697-4278-BB56-1EE18EFD80A1.jpg
    8EA5F75F-C697-4278-BB56-1EE18EFD80A1.jpg
    65.5 KB · Views: 1,572
  • CDC48B34-EFA1-4F28-95AC-FB50508B8775.jpeg
    CDC48B34-EFA1-4F28-95AC-FB50508B8775.jpeg
    64.2 KB · Views: 1,474

Members online

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service

Trending content

Back
Top