Recent Gas Mileage

Trumpet · Tuesday at 8:43 PM

gomiami said:
lol. Denial is not a river in Egypt.

I get a steady 18 to 19mpg town or highway. Only drops when I pull the trailer. Then it's 11mpg.

gomiami · Tuesday at 11:05 PM

Trumpet said:
I get a steady 18 to 19mpg town or highway. Only drops when I pull the trailer. Then it's 11mpg.

Yeah, I haven't towed. I'm sure my average would drop to nothing if I did.

Trumpet · Wednesday at 12:08 AM

If i set the cruise control to 60 and stay in the right lane i can get around 21. But my boots are heavy

gomiami · Wednesday at 5:34 AM

Trumpet said:
If i set the cruise control to 60 and stay in the right lane i can get around 21. But my boots are heavy

Funny but I always get worse gas mileage when using cruise.

Talyn · Wednesday at 12:16 PM

Humble Leader said:
its probably all the fluid film weighing down my vehicle I bet

I used to be a dealer for FF.

Talyn · Wednesday at 12:18 PM

Talking to another 4runner friend.
He says 21-22 locked in at 55 on cruise.

I must be stuck in the 90's on how they measured this stuff still.
I didn't think to use my brain to realize its measured around 70mph, not 55 anymore.

gomiami · Wednesday at 1:25 PM

Humble Leader said:
its probably all the fluid film weighing down my vehicle I bet

lmao

Talyn · Wednesday at 2:20 PM

You can order it by the 55 gallon drum, and you can run it out of a paint sprayer and other tools of the like.

So, undercoating with it is quite easy actually.

Humble Leader · Friday at 3:40 PM

Talyn said:
I used to be a dealer for FF.

IMO FF is a great product. I use it on the punch welds and to line the drain areas in the doors and hatch. no rust. Im amazed at how the dust sticks to it and forms this thick black coat that stays oily and repels water basically forever after you apply it. for me in the spots I apply it I dont need to reapply ever unless it gets rubbed off. if I undercoated with it though it probably needs to be done annually I would think

gomiami · 2026-10-24T15:30:17+0100

Humble Leader said:
IMO FF is a great product. I use it on the punch welds and to line the drain areas in the doors and hatch. no rust. Im amazed at how the dust sticks to it and forms this thick black coat that stays oily and repels water basically forever after you apply it. for me in the spots I apply it I dont need to reapply ever unless it gets rubbed off. if I undercoated with it though it probably needs to be done annually I would think

Fluid Film, Woolwax, etc. application + a good dusty dirt road drive is a winning combination.

1000MPH · 2026-10-24T20:45:41+0100

Range don’t lie. Taken last Monday.

Recent Gas Mileage

Trumpet

Member

gomiami

Member

Trumpet

Member

gomiami

Member

Talyn

New member

Talyn

New member

gomiami

Member

Talyn

New member

Humble Leader

Senior Member

gomiami

Member

1000MPH

Senior Member

Similar threads

Members online

Forum statistics

Share this page

Trending content