5th Gen Wheel & Tire Thread

[str8flexed]

Would 295/70/17 on SCS Stealth -10 offset wheels (8.5" width) rub the UCA?

I want to avoid getting spacers and am wondering if -38 offset would be better.

Planning on BMC, possible pinch weld hammering if need be.

 

[Ital]

Here are some updated picks of my Enkei ST6 20 x 9.5 ET10 with some spidertrax 1.25 inch spacer and no lift.
I have no rubbing issue in the back.
In the front I had to remove the mud flap and push the fender liner forward.
There is a small piece where i am still rubbing where the mud flap used to bolt on, which I would probably need to trim, but I will also look at the possibility of being able to push it back with a zip tie
The weird thing it rubs only when in reverse on full lock. anyway here are some picks.

Do you guys think it is too aggressive or looks good? I was going to go with 1" spacers in the front and probably would had no rubbing but the company stopped making them, so I just went with the spidertrax spacers

 

[BuzzsawThunderclap]

Countersteer type X and BFG 275/70/17
Bilstein 6112/5100
No rubbing

SOOOOOOO, this is only a 4 year old post but I dig this set up. About to do a 6112/5100 set up myself.

Your's looks great

 

[PauldF]

Newbie, flame on!

Hey, have gone through about 300 of the almost 500 posts here and am more confused than ever. I have a bone stock 2018 4rnr TRDOR with stock tires, rims and suspension. Have KDSS. The stock tires (Dunlop AT20 GrandTrek P265/70/R17) have about 28K mi on them. I like the stock rims ok and don't want to spend more on replacing them in the next year or so. Everything else is bone stock. I will need to replace these tires in the next 6 months or so, and without getting into a rabbit hole about which tire to buy, I need some advice on what the minimum I could do with the rims I have to raise my truck just a bit - maybe 2" or so. Leveling kit? Spacers? New coils and springs? I am not going to be doing any type of rock crawling - just want to have a bit more clearance for flooded streets, trails etc. This is all very new to me and I need some advice that won't break the bank or crazy alter my vehicle. Advice please!

 

[JMZ400]

2012 Trail
17x8.5 Method Mesh Machined
Offset 0mm
Falken Wildpeak AT3 265/70r17
Spidertrax 1.25" wheel spacers
No Lift

Sent from my SM-A205U using Tapatalk

 

[zw470]

17x8.5 Fifteen52 Turbomac HD [classic]

 

[AK Mule]

2012 Trail
17x8.5 Method Mesh Machined
Offset 0mm
Falken Wildpeak AT3 265/70r17
Spidertrax 1.5" wheel spacers
No Lift

Sent from my SM-A205U using Tapatalk

Those look so good! My neighbor has those on his 1-ton GMC, and I would love to get them on my 4Runner AND my GMC Yukon. Looks like they may not be available under 20 inch diameter anymore in machined finish.

 

[BigMike603]

275-70-17 General Grabber ATX, 108 Ultra Extreme Wheels 17 x 8.5 -6 Offset.

 

[JMZ400]

Those look so good! My neighbor has those on his 1-ton GMC, and I would love to get them on my 4Runner AND my GMC Yukon. Looks like they may not be available under 20 inch diameter anymore in machined finish.

Thanks! I'm almost 47 so it's the old school in me lol. I don't believe you can get machined finish in ANY size anymore. I had to peice this set together

Soon to have Eibach lift and 285's.

Sent from my SM-A205U using Tapatalk

 

[MillerPKA]

285/70 General Grabber X3
17x8.5" Method MR701

 

[BuzzsawThunderclap]

I see these folks are a sponsor. Any of you use them?

Venomrex: All Terrain, Off-Road Performance Truck Wheels

 

[cccolin]

Wildpeak AT3W with ProComp 35 Predators

thanks, that's helpful. that's almost exactly the setup I was thinking of, in the same colors. are those actual beadlocks or just aesthetic?

 

[MGordo]

Posting a picture of my friends 4Runner.. recently sold him my Konig Six Shooters and he mounted them on 275/70/17 Cooper Discoverer AT3 LTs. Stock ride height and had to trim the fender liner a little.

 

[BuzzsawThunderclap]

Spare wheel Well

Does anyone here know how big of a tire on stock rims will fit in the spare wheel well. Considering 285/70/17 Falken tires and would very much prefer not adding a tire rack on the rear bumper (yet)

 

[UncleBo]

I have the same runner and am looking to put those tires on. Thanks for the info.

 

[Anki_or_Bust]

Silver 4runner can’t decide between matte gunmetal or matte black SCS ray 10 wheels. What are your opinions???

 

[bugkillr]

Silver 4runner can’t decide between matte gunmetal or matte black SCS ray 10 wheels. What are your opinions???

Mine is Magnetic Gray,,,but I'm still of the mindset that matte black is played out ( except in certain instances)
I'd do gunmetal or even machined.

 

[The_Green_Wang]

Does anyone here know how big of a tire on stock rims will fit in the spare wheel well. Considering 285/70/17 Falken tires and would very much prefer not adding a tire rack on the rear bumper (yet)

They fit.

Sent from my SM-N970U using Tapatalk

 

[Cd45qq]

I bought a 2012 4Runner Limited a month ago. It has Michelin Premier LTX's on it. I read the reviews on the Michelin site, I was not impressed. My question is this, will 265/60f20's fit without a lift and no rubbing? Thanks.

 

[rsimi72]

Silver 4runner can’t decide between matte gunmetal or matte black SCS ray 10 wheels. What are your opinions???

Agree that black wheels are getting pretty common, but they would provide a little more contrast than the gunmetal. I’d choose black. Good problem to have, though.