Any pics of 2” lift & FN 6-shooters in Graphite?

[jjdbike]

Hellow everyone.

I’ve got a classic 2011 SR5 w/ a 2 1/2" front 2” rear lift, UCA’s etc. My plan is going w/ FN Konig six shooters in Gunmetal Gunmatallic. Want to upsize to 285/70/17 Cooper Adventurer AT/W.

I know this is a very specifc request, but someone here has to have something similar so here goes.

Does anyone have anything similar or pics of anything similar? I’d really like to see how a lifted ( = or < 2 1/2”) silver looks w/ the graphite FNs & 285s. I know I’ll like it. I just want to show my wife so she isn’t too suprized.
Thanks!
JD

 

[jjdbike]

Here’s the thing I’ve noticed from looking at pics here. Some trucks look huge, really tall & aggessive, while others look subtal and for lack of a better term, well balanced.
It may be the diff between 1.75 - 2”lift w/ moderate AT’s vs 3” w/ supper aggressive MT tires & spacers.
Could also have to do w/ angles and how the camara captures it.
I suppose my prob is I’ve only seen these in pics not in person.
Like I said, I know I’ll like it but my wife drives it sometimes to “academic - professional” functions. She’s in a leadership position & is concious of image.
I just want a little more ground clearance and sure-footed performance in soft rutted sand, snow & trails & light off-road. I don’t mind a badass look but wife is a wildcard.
I’d love to be able to show her a pic or two before I get 285’s bolted on so it’s not an big & possible unpleasent suprize for her. She hates that super aggressive & all blacked out look, especially black wheels. I kind of like it. It certainly is getting very popular and common to see on the road.
Thanks!
JD

 

[Engineer]

I don't have a picture to help you out, nor do I know the specs on those wheels but I image they are not as aggressive of an offset as you would get with 1.25" spacers (sounds like a good thing). If you don't go with an aggressive square shoulder tire it will go along ways in toning down the "over done" look.

Coming from some one who has spacers on OEM wheels and KM2's :dizzy:

Good wheel choice, when I was looking at Tacoma before 4runners I had saved a photo of a Mag grey 4door short bed with those wheels and IIRC only mild AT tires....would be good comparison but of course I can't find the picture anymore.

P.S. If its her car always get approval , image if you came home and all your shirts has been bebazzled. :croc:

Close: http://www.toyota-4runner.org/5th-g...ray-bilstein-0-85-konig-six-shooter-17x8.html

Closhish: http://www.toyota-4runner.org/5th-gen-t4rs/147112-installed-17x8-konig-six-shooters-fn-wheels.html

 

[jjdbike]

I don't have a picture to help you out, nor do I know the specs on those wheels.
Good wheel choice, when I was looking at Tacoma before 4runners I had saved a photo of a Mag grey 4door shorted with those wheels and IIRC only mild AT tires....would be good comparison but of course I can't find the picture anymore.

Thanks Engineer.
The specs on the Konig six shooters are 17 X 8 w/ 0mm offset & 4.5 backspace.
We share the vehicles depending one who’s doing what. Outr other vehicle is a Honda Civic. She’s a lot more image concious than I am (she’s also in a lot higher profile & more prestegios position that I am. I figured I’d get “grow a pair” replies. I just want to be respecful to my bride.
I appreciate your reply very much.
Take care.
JD