Rocket61
New member
I'll be making pods for the doors. The 6.5" woofer and 3" mid will mount in the door in place of the factory 6x9 The hole in the steel is huge, plenty of room.
would you mind posting a pic when you're done?
I'll be making pods for the doors. The 6.5" woofer and 3" mid will mount in the door in place of the factory 6x9 The hole in the steel is huge, plenty of room.
Are you going to be installing this yourself? If so have you done this before or are you comfortable doing it? Do you have the tools?
Honestly the install is easy (youtube has everything for the 5th gen) and you can save alot of money doing it yourself... but if you mess it up you can cause alot of headache and end up spending more in the long run.
I say you should start off small and keep it simple. Basic upgrades will probably satisfy your needs anyways, no need to spend a ton of time and money for a daily driver...
My advice for a budget system:
Pioneer 5 channel amp This will fit under the seat, has high level inputs, it doesn't get too hot, 5 channel so you can bi-amp/bridge the fronts or amp the rears in the future...
Infinity Refrence 6x9 components most people like infinity's, decent crossovers, the 6x9s will put out good mid bass and be easy to install.
amp install kit You could spend the money on a 0 gauge kit if you want but its overkill for this amp.
Rockford P2 this is a basic sub. The amp is rated to 600w rms for the sub so you could step up to something like the Rockford P3 which would be much nicer but still within a budget.
Hatchback sub box
speaker connector adapters
stereo harness adapter
Reverse Stereo harness adapter
6x9 adapters
Tweeter adapters
fatmat all you need to do is the front doors
Speaker wire for the sub
This comes out to exactly $740 (before tax). It will be plenty loud and it will sound good. The OEM+ system is $1700, im sure the sound quality is much better (it has a DSP) but it comes at a price, and even then they don't really provide many specifics (no way that system is going to be that loud with only 360w rms)
What adapters/cables will be needed to run 6.5 in the front doors and to install the tweeters in the dash? Will the two links below work?
https://www.amazon.com/Aftermarket-Plastic-Speaker-Adapter-Highlander/dp/B007ZQGZWO/ref=pd_bxgy_107_3?_encoding=UTF8&pd_rd_i=B007ZQGZWO&pd_rd_r=4YKSXS2EZP5YXY25D0Y0&pd_rd_w=FUYZq&pd_rd_wg=hSRSe&psc=1&refRID=4YKSXS2EZP5YXY25D0Y0
https://www.amazon.com/gp/product/B01BLMBHPW/ref=ox_sc_sfl_title_9?ie=UTF8&psc=1&smid=A1T3AW1B06XC6M
I will be taking the runner to get professionally installed.
The tweeter mount will work, the door mount however is only for the rear doors / hatch. The factory front door is a 6x9. Tacotunes sells an adapter, or the shop can fab one up out of 1/2"MDF or something. As for wiring, the shop should have no problem, but doing it right does take a minute, I had about 3-4 hours in mine.
Toyota 4Runner 6.5 6.75 Heavy Duty Speaker Adapter Front Door Installation Kit
Pricing that different, you are getting quite different level of quality, not apples to apples comparison on components.
Now, is the Rockford $775 system good enough to meet your needs? Who knows, but they are not comparable systems unless you are getting last year's closeouts.
You really do get what you pay for.
What cutout do I need?
Do I need the amazon speaker adapters for the rear/hatch doors as well or can the stock ones be used. Any wirings that I need provide?Ive only provided speakers/sub/amp in the past so doing the whole package is new to me.
Thoughts on the amazon list? Also considering the jl rd900/5 and 10w3 combo as well. I just dont know if I will want that much bass. I do hate the rockford bass knobs though that I would have to install. The JL ones are clean.
Cutout depends on the speaker, whatever you choose should tell you what size cutout you need.
Yes you should get a pair for the doors and rear hatch as well. The speakers may line up, but you'll get a better seal with a mounting bracket (and some foam on both the speaker/mount mating as well as the mount/door mate).
The shop should have all the little connectors they need / what they like to use. I just used some basic spade connectors and inserted into the harness.
The cart is a system for sure, not as familiar with what that will sound like, but you are comparing apples to oranges if you are considering the JL system as well. Two different animals, and over double the price to boot. The labor to install it will be the same though. As I said earlier, for the most part, you get what you pay for. With audio, there is a point of diminishing returns, but I don't think you are approaching that yet. That whole system is only $80 more than I paid for JL C2 components up front and C2 coax in the rear... speakers only. It's very personal though and only you can decide what is important to you. You'll be louder than me, but that's not what I'm after at this time.
So you're saying yours will sound better? Thats what I am after.
What adapters/cables will be needed to run 6.5 in the front doors and to install the tweeters in the dash? Will the two links below work?
https://www.amazon.com/Aftermarket-Plastic-Speaker-Adapter-Highlander/dp/B007ZQGZWO/ref=pd_bxgy_107_3?_encoding=UTF8&pd_rd_i=B007ZQGZWO&pd_rd_r=4YKSXS2EZP5YXY25D0Y0&pd_rd_w=FUYZq&pd_rd_wg=hSRSe&psc=1&refRID=4YKSXS2EZP5YXY25D0Y0
https://www.amazon.com/gp/product/B01BLMBHPW/ref=ox_sc_sfl_title_9?ie=UTF8&psc=1&smid=A1T3AW1B06XC6M
I will be taking the runner to get professionally installed.
I would like to stick with Rockford or JL subs as I like the grilles available for protection and I am constantly putting wetsuits, surfboards, and gym gear in my car and need to keep it covered.
Will anyone critique my amazon cart please?
https://www.amazon.com/hz/wishlist/ls/2D60BTV7PBJ0F?
Also considering the jl rd900/5 and 10w3 combo as well. I just dont know if I will want that much bass. I do hate the rockford bass knobs though that I would have to install. The JL ones are clean.
Do you think the jl setup is really in a different league?
So you're saying yours will sound better? Thats what I am after.
I was very close to the Infinity speakers, but I didn't like the way the impedance of the speakers lined up when running parallel to the head unit, but they are quality speakers.
GaSR5, Price out your "ideal" system that you can be certain you'll be happy with. If that price doesn't make you sick to your stomach, go get it. If you are uncomfortable with it, either do it in phases, or start peeling back some of the pieces to something more budget friendly until you get what makes you happy.
This is irrelevant with a component set because of the crossover, and you aren't using the factory wiring past the door speaker anyways. It especially wont mater when ran off an amp.
Right? I could be wrong, I know a little, but I'm not a audio expert.
Was more concerned about the rears, the Reference coax system impedance is 3ohm, and parallel to the hatch would show the head unit 1.5ohm. I'm not sure when I'm going to get the amp and sub added, so I didn't want to put strain on the head unit and damage it in the mean time.
Well for one you have 2nd row passengers that want to listen also, so you don't want to blast the fronts just so 2nd row can hear.
You are entitled to your opinion, but for a 2 channel stereo source rears are not necessary and in a basic car system without a DSP they take away from the sound stage. When you go to a concert the band/musician/speakers are in front of you for a reason.I prefer sound that is more balanced front to rear, even if no passengers behind me.
And tailgating... Then you can have sound at the rear while grilling / hanging out.
For 2014+ model years the JBL system is only in the LimitedHow do I know if I have the jbl speakers and radio?
True I guess. I just have my front doors and hatch open. The hatch is mostly for the sub, the speakers face downwards.