Hello ladies and gents. Any tips on where to get a tube front bumper?

[pointman]

Searched the forum and found a couple of custom jobs, and one vendor who no longer exists. I was hoping to find a tube bumper, one that replaces the lower end of the stock bumper, from right underneath the stock fog lights. I contacted one of the members here who had made there own, but no luck in receiving a response. I was hoping for something along these lines (photo courtesy of one Mr. easyrider18).

I am in New York City and spend some time in Northern NJ, Bergen County area. Thank you for any leads.

 

[Wesdan13]

Probably not what you’re looking for but the new hybrid bumper from C4 Fab is pretty freakin sweet! It’s tubes... more or less. Not custom but.... is nice to look at.

 

[Wesdan13]

JK I see you’re wanting to keep the stock bumper.

 

[Angelo]

I was hoping to find a tube bumper, one that replaces the lower end of the stock bumper, from right underneath the stock fog lights..

These are the only tube bumpers I know of in production.

Store - Hefty Fabworks

2014+ 4Runner Hybrid Front Bumper | C4 Fabrication

If you're really looking to save the stock fogs, maybe look into the "lo-pro" bumpers that are around? SSO, C4, Victory, and WARN all have a version... the SSO might be of particular interest to you since they have the high clearance "wings" available when you trim your front wheel well bumper cover.

 

[JP421]

These are the only tube bumpers I know of in production.

Store - Hefty Fabworks

2014+ 4Runner Hybrid Front Bumper | C4 Fabrication

If you're really looking to save the stock fogs, maybe look into the "lo-pro" bumpers that are around? SSO, C4, Victory, and WARN all have a version... the SSO might be of particular interest to you since they have the high clearance "wings" available when you trim your front wheel well bumper cover.

C4 has the "wings" available now as well.

2014+ 4Runner Lo-Pro High Clearance Additions. | C4 Fabrication

 

[Mantilgh]

That looks fairly simple. Maybe you could find a local welding/fabricating shop and have them make something similar.

You would probably have some down time with them having to fab it.


Sent from my iPhone using Tapatalk

 

[Mutant138]

There is already a thread for this.

 

[Heavy_GD]

The least you can do is share the link.

 

[pointman]

Probably not what you’re looking for but the new hybrid bumper from C4 Fab is pretty freakin sweet! It’s tubes... more or less. Not custom but.... is nice to look at.

Thank you for the suggestions! I liked that one too, but its a bit much for my needs. I wanted something really minimalist.

These are the only tube bumpers I know of in production.

Store - Hefty Fabworks

2014+ 4Runner Hybrid Front Bumper | C4 Fabrication

If you're really looking to save the stock fogs, maybe look into the "lo-pro" bumpers that are around? SSO, C4, Victory, and WARN all have a version... the SSO might be of particular interest to you since they have the high clearance "wings" available when you trim your front wheel well bumper cover.

Thanks for the links and suggestions. Wanted something more simple. I love the idea of a single tube running across the bottom.

That looks fairly simple. Maybe you could find a local welding/fabricating shop and have them make something similar.

You would probably have some down time with them having to fab it.


Sent from my iPhone using Tapatalk

Great suggestion, thank you. I will actually try googling for a local fabrication shop.

There is already a thread for this.

Thank you for your helpful insight. I already saw that thread, and in fact got the photo I posted from that same thread. Unfortunately, that thread did not offer any real insight into the type that is posted above.

The least you can do is share the link.

Appreciate you.

 

[Mutant138]

Thank you for your helpful insight. I already saw that thread, and in fact got the photo I posted from that same thread. Unfortunately, that thread did not offer any real insight into the type that is posted above.

Searched the forum and found a couple of custom jobs, and one vendor who no longer exists. I was hoping to find a tube bumper, one that replaces the lower end of the stock bumper, from right underneath the stock fog lights. I contacted one of the members here who had made there own, but no luck in receiving a response. I was hoping for something along these lines (photo courtesy of one Mr. easyrider18).

You have exhausted your search effort. It's custom or the options listed. I always ask vendors but they don't seem very interested.

 

[pointman]

You have exhausted your search effort. It's custom or the options listed. I always ask vendors but they don't seem very interested.

Hence this thread. Hoping there was some new developments. I'll post if I find a good alternative.

 

[CavPro]

Hence this thread. Hoping there was some new developments. I'll post if I find a good alternative.

Try SDHQ - Your Motorsports Headquarters they fab up a ton of projects and they are very familiar with the style of bumper you're looking for. Send along that picture when you inquire about it.

 

[pointman]

Try SDHQ - Your Motorsports Headquarters they fab up a ton of projects and they are very familiar with the style of bumper you're looking for. Send along that picture when you inquire about it.

Thank you! I appreciate it. Got my fingers crossed.

 

[Mutant138]

Hence this thread. Hoping there was some new developments. I'll post if I find a good alternative.

That's what the old thread is for. You don't make a new one. Bump the old one. This clogs the search results. Forum etiquette is appreciated. It's not a message board.

 

[pointman]

That's what the old thread is for. You don't make a new one. Bump the old one. This clogs the search results. Forum etiquette is appreciated. It's not a message board.

Are you a moderator of this forum, or part of ownership?

 

[Mutant138]

Are you a moderator of this forum, or part of ownership?

Oh my fault. Didn't mean to offend you by pointing out how your clogging the search results for every 4runner owner looking into tube bumpers. This of course after I SPOON FEED all the answers you needed anyways. I'll leave you to your entitlement.

 

[pointman]

Oh my fault. Didn't mean to offend you by pointing out how your clogging the search results for every 4runner owner looking into tube bumpers. This of course after I SPOON FEED all the answers he needed anyways. I'll leave you to your entitlement.

Haha, not offended at all. I deal with sad people all the time, so it would take more than that to get to me. I appreciate the admittance of guilt though. Kudos.

Reviewing your last several posts (extending beyond this thread), it appears as though you are an agitated individual who likes to comment on topics that in no way pertain to you or your interests. You also seem to enjoy attempting to take an authoritative stance in doing so when clearly you have zero say in anything. For your own betterment and to save the eyes of those who are exposed to your adolescent "jibber jabber", perhaps contemplate not commenting in the future. Whether these outbursts are fueled by an abundance of time or to fill a void in your life, it just reflects poorly on yourself so try to find another venue to satiate your needs (preferably in private where no others are exposed to it). Good luck, little fella. I'm rooting for you.

 

[baldrik78]

Haha, not offended at all. I deal with sad people all the time, so it would take more than that to get to me. I appreciate the admittance of guilt though. Kudos.

Reviewing your last several posts (extending beyond this thread), it appears as though you are an agitated individual who likes to comment on topics that in no way pertain to you or your interests. You also seem to enjoy attempting to take an authoritative stance in doing so when clearly you have zero say in anything. For your own betterment and to save the eyes of those who are exposed to your adolescent "jibber jabber", perhaps contemplate not commenting in the future. Whether these outbursts are fueled by an abundance of time or to fill a void in your life, it just reflects poorly on yourself so try to find another venue to satiate your needs (preferably in private where no others are exposed to it). Good luck, little fella. I'm rooting for you.

Savage.

 

[Mutant138]

Haha, not offended at all. I deal with sad people all the time, so it would take more than that to get to me. I appreciate the admittance of guilt though. Kudos.

Reviewing your last several posts (extending beyond this thread), it appears as though you are an agitated individual who likes to comment on topics that in no way pertain to you or your interests. You also seem to enjoy attempting to take an authoritative stance in doing so when clearly you have zero say in anything. For your own betterment and to save the eyes of those who are exposed to your adolescent "jibber jabber", perhaps contemplate not commenting in the future. Whether these outbursts are fueled by an abundance of time or to fill a void in your life, it just reflects poorly on yourself so try to find another venue to satiate your needs (preferably in private where no others are exposed to it). Good luck, little fella. I'm rooting for you.

"Haha, not offended at all."
-Proceeds to research into my post history and write an essay about nonsense.

That is a cute way of blatantly projecting.

 

[ManhstuhT4R]

Hit up hefty fabworks for a tube bumper. Ask for Chris and tell him Anthony from Toyteclifts sent you. They are in stock ready to ship no wait time!