King shocks update!

I am looking forward to seeing your stance and thread count. I have the same setup just a older generation. I have about 3 threads on the coilovers and there is too much rake in the front. I am thinking I need to go up about 1-1.5 inches in the front. I will have a better idea after seeing yours.

I am hoping to be able to get some 285's under it and get rid of the spacers.

I love the ride on from the Kings. It is not so stiff that I am beat up at every bump but stiff enough that I don't bounce.


King told me that I needed to change out the springs to get more lift. They said I shouldn't put any more preload on the coils. That left me not sure what to do.
 
Desert Fox said:
I am looking forward to seeing your stance and thread count. I have the same setup just a older generation. I have about 3 threads on the coilovers and there is too much rake in the front. I am thinking I need to go up about 1-1.5 inches in the front. I will have a better idea after seeing yours.

I am hoping to be able to get some 285's under it and get rid of the spacers.

I love the ride on from the Kings. It is not so stiff that I am beat up at every bump but stiff enough that I don't bounce.


King told me that I needed to change out the springs to get more lift. They said I shouldn't put any more preload on the coils. That left me not sure what to do.
Click to expand...


hy2evu8y.jpg

Too much rake for my liking...
 
MEMO CAMPOS said:
I actually wanted to ask you how many threads are showing on your kings? Or can you measure at the coilover collar?

Yours do seem like they have more turns than mine.
Click to expand...


Sorry man, I just saw this. I'll try to get the measurement by tomorrow afternoon.
 
I was at jc alignments today and saw your rig while getting my alignment done.

Love the kings! Once I saw your rig I almost instantly knew it was from this thread! Funny I spotted it. Nice looking ride. Hope you get it aligned properly.
 
chmura said:
I was at jc alignments today and saw your rig while getting my alignment done.



Love the kings! Once I saw your rig I almost instantly knew it was from this thread! Funny I spotted it. Nice looking ride. Hope you get it aligned properly.
Click to expand...


Right on thanks! Im glad you use JC's he is the best and been using him for over 8 yrs! Only guy that can get my alignment spot on.

My rig was there for more preload on the kings, too much rake with the icon rear springs.
 
Gabex35 said:
Sorry man, I haven't had a chance to measure but got these photos:
Drivers

Passengers


*keep in mind that i am running a 1" rear coil so this wouldn't help much with your 2" Icon coils.
Click to expand...


Thank you sir, I did have to go a little more than you. I might just go your route on the rear springs. I just have to let the initial purchase of all the goods settle in with my wife before I go spending more money. Lol
 
MEMO CAMPOS said:
I was looking for the plushest set up considering it hauls my wife and 3 kids. Plus my wife drives it 99% of the time. I also got the best deal on kings. I do have Icons on my 05 Tacoma so I'm very familiar with digressive valving compared to King's progressive valving. Overall I'm satisfied in 2 different ways!
Click to expand...

I had an 05 tacoma also, and know lots of guys running Icons with it. Can you describe the difference between your ride of Tacoma with Icons and 4Runner with Kings?
Thanks

I will also be hauling wife, kids, pups, etc...

Cheers
 
My tacoma feels a lot tighter if you will, you can also say stiffer more of the time. Its kinda hard to compare both trucks due to the tacoma having a leaf sprung rear suspension and 4runner has a coil spring. However the kings are far more forgiving through pot holes, speed bumps etc. where as my icons you really have to push them to get them to soften up. This is also known as digressive valving, king uses progressive valving.
Overall I like both a lot, for different reasons but very happy with both my set ups. So if you prefer a sportier feel go for the icons, plusher more buttery feel go for kings and if you go kings get the compression adjusters so that you can tune the ride a little better to satisfy your fancy!

Happy modding!
 
Sorry, but I'm confused. I want 2.5inches of lift. Will these do it? Also, why can't you adjust it on the vehicle? It looks just like my rad flos I had. Just loosen that Allen nut and stick a Allen wrench in the hole and turn them. Wheels off the ground of course. What am I missing?
Thanks
 
Instead of starting a new thread I figure'd we could keep all the King info here. I'm in the process of ordering coil overs and plan on going King. To recap, the new reservoir brackets supplied by King will not work on KDSS vehicles due to the lack of a threaded frame insert.. correct? And this can be fixed by welding the bracket on? Does anyone know if a nut can be welded into the hole in the frame, such that the bracket can simply be bolted on?

Secondly, does anyone have any thoughts on using the Icon reservoir bracket? I believe they have a new bracket that is compatible with KDSS.

I'm open to any other thoughts on the matter, I'd just like to avoid chopping/welding up my frame if at all possible.
 
Have you talked this over with the engineers at King?
You are not to far from them, they may be inclined to use your 4Runner for some prototype work.
 
You must log in or register to reply here.

Similar threads

bassmacka
2016 4Runner TRD OFF ROAD 120k Custom Build Nashville TN $36,000 OBO
Replies
2
Views
5K
69desertdog
6
M
King Shocks & Lift Advice: Springs, Sway Bar Links, and anything
Replies
0
Views
11K
MtnClimbr
M
alirawk
New Goodies for the Rig
Replies
1
Views
1K
RO1973
RO1973
J
5100 OME Kit Regrets - Way higher than expected
Replies
6
Views
2K
jlaw904
J
Clifford
Bump stops spin- cannot remove
Replies
2
Views
369
Clifford
Clifford

Members online

No members online now.
Total: 414 (members: 0, guests: 414)

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top