LC2013`s build thread

[LC2013]

i changed to the 06 headlights with the blinker in it. Much better this way, easy swap.

Did the socket fit from the fog turn signal? Luckily i did the 06+ as well but my turn is empty in the headlight.

Sent from my SM-G930P using Tapatalk

 

[LTDSC]

Did the socket fit from the fog turn signal? Luckily i did the 06+ as well but my turn is empty in the headlight.

Sent from my SM-G930P using Tapatalk

its a whole new harness from toyota i soldered on after snipping existing plugs. Then added correct plugs to my pods and plugged them into the fog harness. Plug n Play.

 

[LC2013]

Awesome.....thank you. It looks like Ill be going the same route....should be easy enough.

 

[LTDSC]

Awesome.....thank you. It looks like Ill be going the same route....should be easy enough.

somewhere in my build thread i have the bags with part #s, its straight forward from there.

 

[LC2013]

New lower control arm stuff.....

So Im trying to confirm that I have the proper parts for the lower control arm bushings and cam/caster bolts.....does this seem about right?

I was hoping it would be cheaper.......man OEM is expensive.

 

[LC2013]

Got these in today....with some nice scratches....just gonna prep and respray using the following method:
http://metalcloak.blogspot.com/2010/08/using-rustoleum-to-clean-up-black.html




I still think I want to have a hoop/s attached.....hm.......

 

[LC2013]

Bumper off......painted it all nice behind.

Sent from my SM-G930P using Tapatalk

 

[LC2013]

Bumper on



Sent from my SM-G930P using Tapatalk

 

[LC2013]

New light bar to fill up the bumper gap.







I also got a new winch....unfortunately they didn't send me the one with a synthetic line so I had to send it back -_-.

 

[Texas866801]

LC2013... 2 things. How's that backup camera holding up? I see versions of it on Amazon all the time. And on your USB/AUX you installed, is the aux connected to your pioneer?

Sent from my Nexus 5X using Tapatalk

 

[LC2013]

LC2013... 2 things. How's that backup camera holding up? I see versions of it on Amazon all the time. And on your USB/AUX you installed, is the aux connected to your pioneer?

Sent from my Nexus 5X using Tapatalk

It's actually holding up great. I also installed one on my girlfriends car, and now my buddy wants one.

Yep it sure is.

Sent from my SM-G930P using Tapatalk

 

[Texas866801]

Great. I'm gonna grab a very similar camera then. And I'd love to know how you hooked that AUX up. That's the set up I want too.

Sent from my Nexus 5X using Tapatalk

 

[LC2013]

Great. I'm gonna grab a very similar camera then. And I'd love to know how you hooked that AUX up. That's the set up I want too.

Sent from my Nexus 5X using Tapatalk

Which head unit do you have?

Sent from my SM-G930P using Tapatalk

 

[Texas866801]

I've not installed it yet, still buying parts. It's a android unit by Joying.

https://www.carjoying.com/joying-au...ruiser-hilux-yaris-tundra-highlander-cel.html


Sent from my Nexus 5X using Tapatalk

 

[LC2013]

I've not installed it yet, still buying parts. It's a android unit by Joying.

https://www.carjoying.com/joying-au...ruiser-hilux-yaris-tundra-highlander-cel.html


Sent from my Nexus 5X using Tapatalk

Looks like a nice head unit.....should work out well.

 

[LC2013]

Installed extended sway bar end links and prepped/painted the rear to get rid of the unsightly rust.

It isnt smooth because I used undercoating ......hopefully it helps with chipping.

 

[LC2013]

Went floating and took some pics.

Sent from my SM-G930V using Tapatalk

 

[benzfanatical]

Beautiful rig!


Sent from my iPad using Tapatalk

 

[abishoff]

looking good

 

[LC2013]

Beautiful rig!


Sent from my iPad using Tapatalk

looking good

Thanks guys!!

So question for whoever reads this........I have a chance to pick up a local pair of Icon ext travel coil overs w/ approximately 20k on them for $700 (includes spanner).

Should I jump on it or? Pics below.....