i did try the heat gun first when i had rubbing, but just ended up removing that small piece in the long run as there arent any issues without it. take it off and see what you think--super easy to add back on if you aren't a fan
Limited Edition Mod Thread
- Thread starter jwatson
- Start date
i did try the heat gun first when i had rubbing, but just ended up removing that small piece in the long run as there arent any issues without it. take it off and see what you think--super easy to add back on if you aren't a fan
Will do. Thanks
daytonaviolet
New member
Try to see exactly where the rubbing occurs. If it’s in the corners of the liner, a simple push forward and re-drill should work. But if it’s in the center of the liner, that’s where the heat gun and a short stick works well.
dktxt4r
New member
As far as I know, this hasn't been done yet. I don't know if there are different aspects of safety sense between different trim but I would assume (in the most literal sense) that it shouldn't be a problem and the wiring should be the same. Keep in mind this is all conjecture on my part but I don't see why it would be different. You could be the pioneer and be the first to do it.
daytonaviolet
New member
i did something similar but without the safety sense. but since all the 2020 have them including the TRD OR and the TRD Pro, it should be a simple bumper swap.
please take a look at my build thread in my signature which may have some answers for me. just PM if if you have further questions and i'll gladly answer.
Here are my 2020 Nightshade Mods.
- Tinted the windows dark.
- Got the netting for the back cargo area.
- Perfect fitting sunshade (heatsheild)
- Center Console tray + organizer
- Glove Compartment Organizer
Want to do.
- Thinking about removing the step rails. I kinda hate how low it makes it look.
I really wish the limiteds didn't look so low.
- Tinted the windows dark.
- Got the netting for the back cargo area.
- Perfect fitting sunshade (heatsheild)
- Center Console tray + organizer
- Glove Compartment Organizer
Want to do.
- Thinking about removing the step rails. I kinda hate how low it makes it look.
I really wish the limiteds didn't look so low.
daytonaviolet
New member
simple, just remove the limited rocker panels and replace them with the SR5/TE/TRD ones. this way it opens up many options for running boards, steps or sliders. this will also make the sides look higher 
Want to do.
- Thinking about removing the step rails. I kinda hate how low it makes it look.
I really wish the limiteds didn't look so low.
BIGpharma
New member
Spidertrax with oem trail wheels and tires. No rubbing at all! Every search I found on this forum said that I would rub slightly with OEM tires. Not always the case I guess! Looks much better, especially with the limited as the body kit makes the tires look so tucked
Before:
After:
Before:
After:
Last edited:
Just curious, did you try this wheel/ tire combination before adding the spacers? If so, was there any rubbing before adding the spacers? I just bought a set of 2018 Off Road wheels for my Limited and was planning to install with OE size AT tires.
BIGpharma
New member
No It did not, it doesn’t rub with the spacers either which is what was questionable from reading other posts. Without spacers you will not rub on OEM size tires. Wheel spacers usually CAUSE rubbing not the other way around!
Ah gotcha. Thanks for your reply!
That entire piece comes out pretty easily. I removed mine and left the mud flap on, then pulled fender liner forward. Running Spidertrax and stock TRD Pro wheels.
Sent from my iPhone using Tapatalk
daytonaviolet
New member
MrGainzz
New member
daytonaviolet
New member
lanceramirez19
New member
planning to replace my liftgate garnish panel (door handle chrome) to black one like the nightshade edition, somebody knows what the part no. for the handle please?! looking for similar on the photo here
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Thanks!
I have been lurking this thread for quite a while and wanted to thank everyone. This thread was a big help getting my son's 4runner set up.
Daystar 2.5" Lift
Fuel Assault Wheels
285/65/18 Nitto Ridge Grappler
Removed the small mudflap and did the wheel liner push forward mod. No rubbing.
I have been lurking this thread for quite a while and wanted to thank everyone. This thread was a big help getting my son's 4runner set up.
Daystar 2.5" Lift
Fuel Assault Wheels
285/65/18 Nitto Ridge Grappler
Removed the small mudflap and did the wheel liner push forward mod. No rubbing.
Last edited:
