Part number for wire harness clip

[davidch]

The forward O2 (or air flow) sensor plugs into the transmission wiring harness atop the transmission. (I'm dealing with a 2000 V6 5-speed here.)

The wiring harness's plug is held, by a small intermediate clip, to a metal plate that is affixed to one of the bolts that clamps the transmission to the bell housing.

It's that intermediate clip that I need. I've spent time looking at an online parts diagram and have been unable to find this clip. Does anyone knows its part number?

The photo below shows a similar component. The red arrow points to the small clip's location, between a plug that is a part of wiring harness, and a metal plate.

 

[4Reak Show]

Those break all the time. Easy install, hard to remove if it's buried. I normally just wrap a zip tie and have had success. If you're set on THAT clip, I may have time next week to cruise to Toyota as ask about it.

 

[TheDurk]

You should be able to find it below. I think it is 82711-3A540.CLAMP WIRING HARNES | Genuine Toyota | 82711-3A540

 

[TXLX1]

Zip tie if you can. I had a couple of those style holders break and toyota wasn't sure exactly what part number