Post your LIFTED pix here!





Stock Measurements (w/ Mickey Thompson MTZ MT 265/70R17):

Driver's Side Front: 34.75"
Passenger Side Front: 35.25"
Driver's Side Rear: 37.00"
Passenger Side Rear: 37.25"

After installation:

Driver's Side Front: 36.5"
Passenger Side Front: 36.75"
Driver's Side Rear: 38.00"
Passenger Side Rear: 38.25"


After:

Driver's Side Front: 37.125"
Passenger Side Front: 37.125"
Driver's Side Rear: 37.75"
Passenger Side Rear: 37.875"

http://www.toyota-4runner.org/5th-gen-t4rs/147258-no-low-lift-icon-suspension.html

David
 
I'm in love again, just got all my lift, rims, tires and alignment
OME medium front and rear, six shooter konigs, dura 285/70. It's so easy to make these look bad ass!

:party:
 

Attachments

  • image.jpg
    image.jpg
    132.6 KB · Views: 7,130
Updated my sig, here's a pic of my 2005 sport Ed.:
Daystar, spidertrax, gobi, BFG 265's, 3m hood wrap matte black, 165,000 still 100% problem free. This will be my boys first car, for $2k. He's halfway there.
 

Attachments

  • image.jpg
    image.jpg
    134.5 KB · Views: 7,351
I'm in love again, just got all my lift, rims, tires and alignment
OME medium front and rear, six shooter konigs, dura 285/70. It's so easy to make these look bad ass!

:party:

How's the ride with mediums coils? Do you have ome shocks too? I am more than likely going the same route to lift my runner. Only thing is I went with 265/17 tires. Wonder if it will look off with smaller tires and not meats like you have.

Thanks!
 
WOW! Talk about offoading. You took that thing WAAAY off the beaten path in that last picture, on the sand lol. I'm just playing. Looks good, man.:thumb3:

I know right! I'm dying to test her out on some trails just haven't had time. Soon!
 
How's the ride with mediums coils? Do you have ome shocks too? I am more than likely going the same route to lift my runner. Only thing is I went with 265/17 tires. Wonder if it will look off with smaller tires and not meats like you have.

Thanks!

Hey, I have the medium coils and ome shocks installed. It rides like it sounds, pretty tight and firm. The only thing I would have done different is replacing the uca's while under there with everything tore out. Anything over 65-70 mph and my damn steering gets squirrely.

I have the 285's but really went back and forth bt that and 265's. I like a leaner looking car, and I will help the look of mine by removing my running boards and installing the SW sliders I ordered. My sized tires I think will look better and less cluttered that way. Had I kept the factory running boards, I prob would have done the 265's. FWIW, Antman has 265's and its damn tough looking

Check out this website. I'm very visual and it helped me out with the decision...
265/70-R17 vs 285/70-R17 Tire Comparison - Tire Size Calculator
 
Sorry to say but this runner is only a prerunner no axles! Yes a fj kit is compatible with a runner suspension! thats wat i used to install a 6" lift! the only differences is the lower control arms and camber bolts,they are bigger than fjs! the lift i used is a fabtech kit from an 07 fj cruiser! 6" front and rear rolling on 35/12.5 nitto mud grapplers, on 20" rims.! fine isnt she! i would of got a 4wheel drive but u would know how that would go!

so your saying that the 4wd 4Runner cant use the FJ 6" lift?

i've been waiting for a 6" lift to be made.. why aren't more people using the FJ 6" lift?

anybody else have anymore info on this subject?
 
anyone know any info on doing this? any issues that we would run into? i don't think he's on here anymore.. or at least not active.. i'm VERY interested

Ok i'm back. Sorry I don't have any suggestions or answers for ya, BUT :iagree: that is one B-E-A-UTIFUL T4R.

Hope you get the help/answers your looking for and when you do, you had better be posting pics. I need some more T4R porn. lol
 
2009 Limited

I've had this setup for a couple months. icon stage 2 with billet ucas. 275/65r18 goodyear mtrs with 18x9 xd addicts. i wanted 285/65r18 tires but the selection was limited and i really liked the mtrs. I flirted with the duratrac 295s but since this is my daily driver i talked myself out of it. I've had both tires in the past on my tundra and they are both good tires. No regrets. Im really happy so far.

So, I was looking at a doing a smilar setup. I have a 2009 V8 Limited, looking at 3" OME and 275/65R18 MTRs. Would they still fit with the mudflaps left on??

According to the Gen4 FAQ, they should still squeeze in with flaps. Thanks!
 
bilstein adj. 5100s at 1.75", rear SAW coils, LR UCAs. tires: Falken rocky mountain 285/70/17, wheels, MB TKOs -6 offset and of coarse...Gobi stealth rack.... thanks for looking!!
 

Attachments

  • IMG_0578.jpg
    IMG_0578.jpg
    133.9 KB · Views: 7,170
anyone know any info on doing this? any issues that we would run into? i don't think he's on here anymore.. or at least not active.. i'm VERY interested

I saw those pictures, pretty nice.

Come to think of it, why do most T4R's only do a 3" lift and not so much a 6" lift? Lack of suspension options?
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,084
Members
248,016
Latest member
Advally Service

Trending content

Back
Top