islandstyle
New member
They both increase the preload and they both hurt ride quality.
That's what I thought..
They both increase the preload and they both hurt ride quality.
They both increase the preload and they both hurt ride quality.
its an eBay special, 2.5/1 it was around 150
Sounds like the Daystar kit.
Might as well post this in the lifted section! Icon Stage 7, overland springs & bump stops. Rides great.![]()
![]()
]![]()
Nice rig! Just looking at pics 1/2/3 and noticed you have your left and front tires in different orientations (looking at side wall). Did the tire shop mess up?:tape:
Might as well post this in the lifted section! Icon Stage 7, overland springs & bump stops. Rides great.![]()
![]()
![]()
![]()
![]()
Looks great! Are you running wheel spacers? I like the stance.
Anyone??
5100's all around. 275 BFG KO2. Took me just under 4 hours to install. Thanks to all those that recommended the "no spring compressor" route. It was a lot easier!
Done and done.
Bilstein 5100s front and rear set at 2.5 with 1.5 daystar spacer in the rear topped off with some Toyo Open Country AT2S
What size tires are you running?
Toyo Open Country AT2S in 285 70 R17
Did you need to run wheel spacers to fit 285/70/17 on your trail rims?
Thanks
Can you explain how a top Mount out of coil spacer increases preload of a coil?
Did not need spacers, seems to be about 3/4". In fact if I did I'd need to do a whole lot of trimming and i am not ready to do that on this puppy just yet. With the 285s I did need to push the fenders forward and I suspect I'd need a BMC like I did on my FJ if I wanted to run the spacers.... Just not ready to put the runner under the knife just yet. maybe next year lol.