Post your LIFTED pix here!

[SoFloT4Run]

I went with the basic 5100 Bilsteins and Wheeler's lift after lots of research.

Front bilsteins are set at 0 with Wheeler's T1 coils.
Rear bilsteins are coupled with Wheeler's T13 coils.

Specs as follows, from ground to the top of the wheel well. (AFTER SETTLING AND ALIGNMENT)

FR: 36 1/8"
FL: 36"
RR: 37 7/8"
RL: 37 3/4"

Frame: Front and Rear on passenger side are dead even at 14 7/8".

I'm only at 20k miles so it'll be a while before I can justify new tires but currently I have Toyo Open Country ATIIs in stock size.

I considered UCAs but wanted to see how the alignment would be first. The first guy that tried royally messed it up, so I took it to the dealership guru and he coaxed it back in after 2 hours. Everything is just about perfect in spec now and it drives great.

Looks great!

What is the marketed Lift height for the Wheeler t1 coils?

 

[Mariner]

Looks great!

What is the marketed Lift height for the Wheeler t1 coils?

Thanks! I believe it was 2.5”, but I’m not 100% sure. I left the bilsteins on the bottom perch.

 

[Colorado_T4R]

Liiiifted!

 

[samwhich]

5100s all around - front set at 2.5", rear lifted with Toytec Superflex RCC2.0 springs.

 

[Garlicsox10]

lift

<a href="https://imgur.com/kf4UKP3"><img src="https://i.imgur.com/kf4UKP3.jpg?1" title="source: imgur.com" /></a>

 

[xterra-racer]

3" OME lift, FN Wheels and 285 70r17 Duratrac tires.

 

[NorcalJB]

 

[kevinb_NJ]

That looks amazing...build details?

Thanks,
Chris

Agreed! Need more detail!

 

[dalesco]

2018 orp

off road premium

 

[crazi160]

first time posting =)

 

[jvtran]

Rough Country 764 Leveling Kit with KMC 20x9 -12 and Goodyear 275/55/20

 

[AlblineStar808]

2.5/2 cornfed 1" Toytec BL Camburg UCAs 285/70 & Spidertraxx

[/IMG]

 

[2016 4Runner SR5]

2.5/2 cornfed 1" Toytec BL Camburg UCAs 285/70 & Spidertraxx

[/IMG]

Any issues with the BL install? Been kicking the idea around but just haven't pulled the trigger and not really sure why. I'm already lifted 3" front, 3" rear and really don't need the extra height but kinda want it lol. :lookout:

 

[zoomin6]

5100s all around - front set at 2.5", rear lifted with Toytec Superflex RCC2.0 springs.

I REALLY think this is what I’ll go with. Didn’t like the idea of a spacer lift, but those rear coils seem perfect and I like the look of the lift. How does it feel?
I assume you got an even 2.5” lift all around? I also assume no rear sag when you have the rear stuffed with things?

Front coils are stock OEM?

I’m also thinking of going with 275’s on the TRD wheels, I won’t need wheel spacers right?
I will be removing all mudflaps and the fender liner mod.

 

[jgfarns]

Told the wife we needed new “shocks” on her car :biggrin2:

 

[SamuelSandoval]

2017 TRD ORP black on black on black on black

Icon 2.5 series coilovers about 2 3/4" in the front

Icon 2.0 series with 700 lbs springs 2" in the back

DuraTrac 285/70/17 D

Icon Six Speed 17 x 8 1/2" Satin Black


I'm pretty happy with the current setup. Maybe this summer I'll add a roof rack and possibly SPC UCA's down the road as well. But for now, with the weight I drive around with, the current lift, wheels and tires will do.

 

[AlblineStar808]

Any issues with the BL install? Been kicking the idea around but just haven't pulled the trigger and not really sure why. I'm already lifted 3" front, 3" rear and really don't need the extra height but kinda want it lol. :lookout:

only issue is jumping up an extra " lol. but no there aren't any issues, 1" is not enough for it to be an issue. so i would do it

 

[2016 4Runner SR5]

only issue is jumping up an extra " lol. but no there aren't any issues, 1" is not enough for it to be an issue. so i would do it

No steering shaft extension needed with this is that right?

 

[AlblineStar808]

No steering shaft extension needed with this is that right?

no nothing at all

 

[2016 4Runner SR5]

no nothing at all

Sweet, I think it's time to place the order. How much of a pain was the install? Looks like the bolts drop down from the top so I assume some interior panels have to be removed?