Project Stormtrooper (01 SC build)

Went to the junkyard today here in Georgia. I am here for a few months for school. Was trying to find a sport hood but no luck in that.

Found a 2000 limited with some wood grain interior. The center cluster piece was broken and all of the window switches were already gone. Picked up all 3 of these pieces for $18.

Some of y'all Georgia people can help me out with some junkyards that would be great.

 
3rdgenfan said:
Went to the junkyard today here in Georgia. I am here for a few months for school. Was trying to find a sport hood but no luck in that.

Found a 2000 limited with some wood grain interior. The center cluster piece was broken and all of the window switches were already gone. Picked up all 3 of these pieces for $18.

Some of y'all Georgia people can help me out with some junkyards that would be great.

Click to expand...



I have the center radio part and switches in wood grain. If you're interested. I'm swapping everything to black since I couldn't find the pieces you actually just picked up. Ha lol



Sent from my iPhone using Tapatalk Pro
 
Been awhile without any updates. Was in Georgia for the past few months doing some school for the Army. Been back home for about a week now. Brought something back home with me.

Picked up a daily. 99 Honda Civic DX hatch. Used to be a big Honda guy back in the day. Still focused on the 4runner but the Honda might get some love. Oh ya, its a 5 speed. Already done some mods if anyone is interested on progress.


The person who had the 4runner before me had some stick on wood grain. Over the years it was starting to peel off and looked pretty bad. Walking around my local junkyard there was a 99 limited with all the wood grain parts minus the drivers switch.


For my wife's 5th gen.


Had a good bit of rake. So i picked these up today to swap out the rear springs to hopefully level it out,
 
Very nice build, sir. Especially love the retrofit projector headlights with the Porsche shrouds. They are huge and look amazing. Was that a kit specifically for the 3rd gen from @theretrofitsource?

Overall, sweet truck man. Super jelly of the blower of course. You found a gem and are making it even better all around.
 
geocook717 said:
Very nice build, sir. Especially love the retrofit projector headlights with the Porsche shrouds. They are huge and look amazing. Was that a kit specifically for the 3rd gen from @theretrofitsource?

Overall, sweet truck man. Super jelly of the blower of course. You found a gem and are making it even better all around.
Click to expand...

Thanks for your kind words. So this is the kit that I used.
https://www.theretrofitsource.com/c...l-kits/bixenon-morimoto-mini-d2s-stage-3.html
 
Nice build m8! You're already way ahead of my stormtrooper ha I'll see you around the 719 some time. Any recommendations on interior cargo nets?
 
Picked these up for $80. Gonna clean them up. Worst case I can get them powder coated or painted black.
<a href="https://imgur.com/XpOTgCZ"><img src="https://i.imgur.com/XpOTgCZ.jpg" title="source: imgur.com" /></a>
 
Last edited:
Finally home from Europe. Got some time to do a few things to the 4runner. I will be posting better pictures. Picked a Nikon D3400 for black friday.

Installed my 1" Toytec body lift.
V1ZQ6Q0l.jpg

0g9AkN0l.jpg


Went to my local junkyard. Saw a wrecked land cruiser. Looked in the back and found this. Gonna modify it to fit in the 4runner. Its about 4" to wide. Paid $13 for it.
jB8demfl.jpg
 
Last edited:
Got around to doing a few things. Wired up my LED's for the DRL and my 1" body lift.

LED's
IMG_4759.jpg
e3Aiv8el.jpg


Body Lift
fullsizeoutput_4a4.jpg
fullsizeoutput_4a5.jpg
fullsizeoutput_4a6.jpg
 

Attachments

  • IMG_4759.jpg
    IMG_4759.jpg
    126.4 KB · Views: 362
  • fullsizeoutput_4a4.jpg
    fullsizeoutput_4a4.jpg
    131.4 KB · Views: 373
  • fullsizeoutput_4a5.jpg
    fullsizeoutput_4a5.jpg
    135.3 KB · Views: 414
  • fullsizeoutput_4a6.jpg
    fullsizeoutput_4a6.jpg
    137.5 KB · Views: 381
Last edited:
Updates

Been awhile since I have done any updates. I have since added an adjustable rear track bar and finally mounted my ARB air compressor.

My Sonoran adjustable rear track bar. It was clearly more beefy that the stock unit. Never really noticed how offset my axle was until I went to install this. The rear end feels more stable now when I hit bumps.
<a href="https://imgur.com/xNwM9st"><img src="https://i.imgur.com/xNwM9stl.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/fCbRVV5"><img src="https://i.imgur.com/fCbRVV5l.jpg" title="source: imgur.com" /></a>

Next up was the ARB compressor. My friend had a sheet of aluminum diamond plate. Made a template from cardboard and cut it out. Also my winch box sits on the same plate. Will be nice to air up my own tires and a front locker? Hopefully in the near future. Want a rear bumper first though.

Cardboard template
<a href="https://imgur.com/1M9n7IH"><img src="https://i.imgur.com/1M9n7IHl.jpg" title="source: imgur.com" /></a>
Finished product with some textured paint
<a href="https://imgur.com/AR2ckgz"><img src="https://i.imgur.com/AR2ckgzl.jpg" title="source: imgur.com" /></a>
All done. You might notice some tape but thats holding the rubber around the outside of the plate until it cures.
<a href="https://imgur.com/QHrcsat"><img src="https://i.imgur.com/QHrcsatl.jpg" title="source: imgur.com" /></a>

Removed my hitch. Looks kinda weird
<a href="https://imgur.com/960M9Oy"><img src="https://i.imgur.com/960M9Oyl.jpg" title="source: imgur.com" /></a>

Parked next to a stock 4runner at work. Crazy to think thats what it looked like when I got it.
<a href="https://imgur.com/5KOkqzS"><img src="https://i.imgur.com/5KOkqzSl.jpg" title="source: imgur.com" /></a>
 
Udates

So I got the chance to install my SPC UCA the other day. Install went pretty smooth. Need to take it in this week for an alightment.
DSC_0010.jpg
Picked up this drawer system at a junk yard from a 100 series land cruiser. Paid $13 for it cause they had to charge me for the carpet. Had to modify it to fit in the back of the 4Runner. Thats why one pf the drawers is smaller the the other. Still need to finish trimming the carpet and staple the carpet.
DSC_0011.jpg
 

Attachments

  • DSC_0010.jpg
    DSC_0010.jpg
    123 KB · Views: 297
  • DSC_0011.jpg
    DSC_0011.jpg
    138.9 KB · Views: 298
Last edited:
3rdgenfan said:
Picked these up for $80. Gonna clean them up. Worst case I can get them powder coated or painted black.
<a href="https://imgur.com/XpOTgCZ"><img src="https://i.imgur.com/XpOTgCZ.jpg" title="source: imgur.com" /></a>
Click to expand...

Looking forward to seeing these LC wheels on your rig. How much did you pay for them? Will you need spacers for the rear?
 
chuapieceagum said:
Looking forward to seeing these LC wheels on your rig. How much did you pay for them? Will you need spacers for the rear?
Click to expand...

I picked up the wheels for $80 and painted them. Picked up a set of 315s for $140 on craigslist also. I did it last weekend I will break out the DSLR and take some good pics.
 
Busted out my camera to snap some pics of the 315s.

<a href="https://imgur.com/qbjotbp"><img src="https://i.imgur.com/qbjotbph.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/o3rKjjD"><img src="https://i.imgur.com/o3rKjjDh.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/UfbkV40"><img src="https://i.imgur.com/UfbkV40h.jpg" title="source: imgur.com" /></a>
<a href="https://imgur.com/xrM0CXS"><img src="https://i.imgur.com/xrM0CXSh.jpg" title="source: imgur.com" /></a>
 
Last edited:
You must log in or register to reply here.

Members online

Total: 248 (members: 1, guests: 247)

Forum statistics

Threads
278,311
Messages
3,554,082
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top