jonesbt is talking about his 01 Tacoma. As far as I know, all of the 01-02 4Runners have the quad channel ABS.
Rear Disc Brake Conversion Kit
- Thread starter midcoma
- Start date
jonesbt is talking about his 01 Tacoma. As far as I know, all of the 01-02 4Runners have the quad channel ABS.
96RedRunner
Senior Member
Tacoma, I missed that part, I'll get back in the truck n close the door.
I'm still paying attention to this mod kit for my 01 Rnr.
I have about 6 kits that can ship this week for anyone interested. Priority will be given to people already on the order list. Message me or respond here if interested.
Kits need to be paid for in order to ship by Friday. Anything later than that will be about a month until they ship because I'll be out of town for work.
Kits need to be paid for in order to ship by Friday. Anything later than that will be about a month until they ship because I'll be out of town for work.
AlpineHigh
New member
Kit
I’m interested in 2 full conversion kits. I’m not sure if I have the ability to PM you, let me know what the wait time is.
I’m interested in 2 full conversion kits. I’m not sure if I have the ability to PM you, let me know what the wait time is.
crazydubman
New member
I'm chiming in late to this thread but wanted to see if production was still there on the kits? Would definitely be looking into the whole package including lines and Ebrake kit.
Factory ABS hasn't kicked on in some time and not for lack of trying. 35's on a heavy 4runner and maybe I need to re-bleed the system as well so not too worried about needing a manual prop valve at this point.
My main issue aside from hating drums in general, is that the factory parking brake, with how my suspension cycles, at full droop or articulated droop, the E brake cables feel like they are going to snap they are so tight when I get underneath the truck. The factory sleeve bracket mounted to the axle, doesn't really allow enough movement for the parking brake cables so they always feel like they bind.
Not sure I'm making sense with this.
I know you mentioned having a 4WU kit so droop is vastly greater than a stock configuration rear setup on a 3rd gen. Hoping you could provide clarity/thoughts.
Thanks,
Factory ABS hasn't kicked on in some time and not for lack of trying. 35's on a heavy 4runner and maybe I need to re-bleed the system as well so not too worried about needing a manual prop valve at this point.
My main issue aside from hating drums in general, is that the factory parking brake, with how my suspension cycles, at full droop or articulated droop, the E brake cables feel like they are going to snap they are so tight when I get underneath the truck. The factory sleeve bracket mounted to the axle, doesn't really allow enough movement for the parking brake cables so they always feel like they bind.
Not sure I'm making sense with this.
I know you mentioned having a 4WU kit so droop is vastly greater than a stock configuration rear setup on a 3rd gen. Hoping you could provide clarity/thoughts.
Thanks,
If you can pay an invoice tonight I can have them shipped tomorrow. Just need to know what model year they're goin on and need an email to send the invoice to.
Kits are still available.
Yes, I have a 4WU 4-link in the rear of my 4Runner. It uses every inch of the 12" shocks, mostly in droop, and the parking brake cables are no where near tight. There is plenty of slack in the cables for the articulation of these 4Runners.
Does that answer your questions?
I can pay if you have a full kit left want to send me an invoice. [email protected] would be the best email to send to
crazydubman
New member
Absolutely. Working to get the funds together to place an order. What is the total package price for a full conversion kit?
Speaking of the 4WU kit, I have been looking at their new rear 3 link kit for the 4runner. Wonder if it is built around a 5” lift like the 4 link kit is. Gonna have to reach out to them again and start talking.
Aloha,
Do you have any kits left?
I'd like to order the conversion kit and the brake line kit.
I have a 1998 Tacoma.
I can send payment via PayPal or Venmo.
Thanks,
Mike
Do you have any kits left?
I'd like to order the conversion kit and the brake line kit.
I have a 1998 Tacoma.
I can send payment via PayPal or Venmo.
Thanks,
Mike
diverdoyle
New member
Could this retro fit on to a 95 pickup ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
diverdoyle
New member
Bump
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
z_runner11
New member
I'd like to purchase a kit and parking brake kit [emoji16][emoji1360] I'll give in and go for the brake line kit as well
Sent from my SM-G973U using Tapatalk
Sent from my SM-G973U using Tapatalk
Doc2012
Senior Member
The one making these kits is my brother.
He’s active duty Navy, and currently doing a deployment work-up; which means he’s back and forth out to sea (currently gone for two weeks, at least).
Give him some time; I’m sure he’ll get back to you guys.
Sent from my iPhone using Tapatalk
He’s active duty Navy, and currently doing a deployment work-up; which means he’s back and forth out to sea (currently gone for two weeks, at least).
Give him some time; I’m sure he’ll get back to you guys.
Sent from my iPhone using Tapatalk
Zoom-a-Loom
New member
Will this kit fit a 1st Gen Tacoma
diverdoyle
New member
Sooo did this idea just die off ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
