Trd pro lift question

[ZRunnerTRDpro]

Before and after pics

Stock TRD Pro

TRD Pro with 2in Toytech

TRD Pro with 2in Toytech and BFG KM2 285 70 R17

 

[ritmatt]

TRD Pro with 2in Toytech and BFG KM2 285 70 R17

Looks good. I have the Quicksand TRDP also. Now that you have the lift and the big tires, how does it feel while driving it? Any issues at higher speeds?

 

[joe_trdpro88]

Icon stage II

Sits and rides perfect. Installed on monday. I forgot to post it in this thread. Tires should get here friday... can't wait.

 

[ZRunnerTRDpro]

Looks good. I have the Quicksand TRDP also. Now that you have the lift and the big tires, how does it feel while driving it? Any issues at higher speeds?

It rides great! no speed issues the tires balanced out nicely. As far as taking it off road I have not done that yet with the new tires. Just got them two days ago, but I'm planning a trip to Silverton Colorado over the week of Fourth of July. I just got back from Moab a month ago and I can tell you that I'm so glad I did this lift. It handled great and I didn't have an inch to spare. It got me through Hells revenge, fins and things, and top of the world.

 

[T4R4L]

Stock TRD Pro

TRD Pro with 2in Toytech

TRD Pro with 2in Toytech and BFG KM2 285 70 R17

Great comparison of the 265s to 285s given the Toytec lift. Thanks for the pics!

 

[SharkTankL]

I've got the 285s. No chop or pushing. Only rubs in reverse full lock ever so slightly.....sometimes. After all this time, I still don't see where it rubs since it is so rare and slight.

If you don't know, now you know!

Are you running any spacers? Rigs looks good!

 

[SharkTankL]

Stock TRD Pro

TRD Pro with 2in Toytech

TRD Pro with 2in Toytech and BFG KM2 285 70 R17

Any rubbing? just ordered a set of 285 KO2s. Rig looks good!

 

[ZRunnerTRDpro]

Any rubbing? just ordered a set of 285 KO2s. Rig looks good!

No rubbing at all on road around town, but I did notice a very slight rub when I had the staring at full lock on one of the switchback in Colorado. Which could've just been the mudflaps. Either way it's nothing to worry about.

 

[pcho74]

Sits and rides perfect. Installed on monday. I forgot to post it in this thread. Tires should get here friday... can't wait.

Wow...that is beautiful...
Can you take a picture of your cv axle boot?? I'm curious how it sits at that height...that is beautiful....


Sent from my iPhone using Tapatalk

 

[SharkTankL]

No rubbing at all on road around town, but I did notice a very slight rub when I had the staring at full lock on one of the switchback in Colorado. Which could've just been the mudflaps. Either way it's nothing to worry about.

Hopefully I have the same outcome, i am running spacers, which im sure will cause rubbing, may just remove them, unless I decide to remove the mud flaps and move the liner back.

 

[simonsay]

Are you running any spacers? Rigs looks good!

No spacers. THanks!

 

[InspectahDeck]

I've been doing a little searching. I am in the Denver metro and am wondering Toytec actually does any of these installs at their shop. Does anyone know?

Edit: Spoke with them yesterday morning. They said they no longer do installs at their location. Apparently not enough walk-in business and too much liability to warrant continuing to do the installs in their shop.

 

[CoMtn4Runner]

Yep, going to go the same route you did once I get my trd pro. Looks awesome

TRD Pro with 2in Toytech

 

[InspectahDeck]

I called the dealership I am working with today to ask whether their service department would do the install. The service advisor I spoke with told me they only do leveling kits and won't do any actual "lifts".

He did recommend a shop that Toytec kind of hesitated on when I asked about them.

 

[WhiskeyMikeTango]

Sits and rides perfect. Installed on monday. I forgot to post it in this thread. Tires should get here friday... can't wait.

Noticed how far your driver coilover is cranked down. Be careful to not go over two inches of gap between the top of the spring collar and the bottom of the top cap. It will cause the spring to bind. Just an observation!

 

[SharkTankL]

No rubbing at all on road around town, but I did notice a very slight rub when I had the staring at full lock on one of the switchback in Colorado. Which could've just been the mudflaps. Either way it's nothing to worry about.

did you have to relocate the sways?

 

[ZRunnerTRDpro]

did you have to relocate the sways?

I talked with toytech they told me it was not necessary. I have not had any issues thus far. I am looking into quick swaybar disconnects.

 

[InspectahDeck]

Anybody had this Toytec TRD Pro kit on for a while and have a long-termish review they can share/post? I'm thinking about pulling the trigger on this kit and ruining my marriage.

 

[Ridin4Runner]

I called the dealership I am working with today to ask whether their service department would do the install. The service advisor I spoke with told me they only do leveling kits and won't do any actual "lifts".



He did recommend a shop that Toytec kind of hesitated on when I asked about them.

Mine dealer would install, but had done much cheaper elsewhere. But showed the parts and was good doing it if I wanted.

 

[Ridin4Runner]

Anybody had this Toytec TRD Pro kit on for a while and have a long-termish review they can share/post? I'm thinking about pulling the trigger on this kit and ruining my marriage.

It's a great ride quality IMO. The wife gave me the whatever when I told her I was doing it. But was a bit easier for her after I bought my "toy car". The lift was child's play, LOL.

That said, the first thing she said when I came home after lift was "your tires look stupid". I said would you like me to buy new larger ones now, I gladly will. LOL. I have 42K on the originals so not to far off for the proper look.