4th Gen Maintenance Tutorials, Writeups, and Picture Threads

Can you please take down or edit the post where you incorrectly remove the CV axle with a home-depot woodworking prybar and a hammer and damage the differential housing and seals?


This is the tool that should be used every time:

Amazon.com: OEM TOOLS 27305 Axle Popper Kit, Fork & Shim Tool, Remove Most Vehicles’ Half-Shaft Drive Axles, Fix Damaged CV Joints: Automotive

Sure, I will update it with the CV forks and try to find some applicable pics of them in action. I agree that I didn't use the most optimized tools for the job, and I now know there are better ways to do things, but its certainly not worth throwing the whole thing out over.

I'll keep the part about the seal damage, and I didn't see any damage to the differential housing after you commented on the original post. Making a mistake is an important part of learning for me, and thats why I specifically made a section on the mistakes I made. Others can see how I messed up and learn from me. If it took 2 $15 seals for me to grow as a home mechanic, then I'm not going to loose sleep over that. Its been about 3000 miles since I did that repair, and there are no leaks.
 
[MENTION=429038]y=mx+b[/MENTION] you’re an asset to this forum!

@mods, can we sticky this thread? I’ve gone back to it at least a hundred times in the last month
 
[MENTION=429038]y=mx+b[/MENTION] you’re an asset to this forum!

@mods, can we sticky this thread? I’ve gone back to it at least a hundred times in the last month

Thanks dude, I really appreciate that! There are a lot of good writeups out there, so I wanted to consolidate them into one place they could all be found. I'm glad it is helpful to you!

A sticky would be cool and may help people find the into they need quicker! :thumb:
 
This is amazing!


Great job and thank you!

Thank YOU for the UCA install writeup and the slash shield PDFs, those are great and all the pics are super helpful. Hoping to upgrade my suspension, UCAs, etc soonish so I'll definetly be referencing back to your pics and might whip up some splash guards too as I'm missing a few.
 
Thank YOU for the UCA install writeup and the slash shield PDFs, those are great and all the pics are super helpful. Hoping to upgrade my suspension, UCAs, etc soonish so I'll definetly be referencing back to your pics and might whip up some splash guards too as I'm missing a few.

You are welcome. I found so many useful guides on this site. I wanted to contribute. It makes me very happy that others find use in my work!

This thread should be a sticky for sure!
 
Last edited:
As a newbie here, this ease of accessing well-organized information is going to make my life a helluva lot easier in the immediate future and in years to come with both upgrades and repairs. Thanks Y!

Please sticky this thread to keep it up top for quicker reference!
 
You are welcome. I found so many useful guides on this site. I wanted to contribute. It makes me very happy that others find use in my work!

This thread should be a sticky for sure!

I certainly agree, great to contribute to such a helpful community!

As a newbie here, this ease of accessing well-organized information is going to make my life a helluva lot easier in the immediate future and in years to come with both upgrades and repairs. Thanks Y!

Please sticky this thread to keep it up top for quicker reference!

Thanks dude! Glad it could be helpful. I still am a bit of a newb myself and had a bunch of these saved in my bookmarks, so having it public is a great way to share some of the older threads I dug up haha.

I agree a sticky would be helpful for people to find this info! I tagged Momo on the first page, but didn't hear anything and didn't want to be too pesky asking a bunch haha. I've added a bunch more threads since then, so maybe its worthy now lol
 
The forum won't allow me to create my own topic, so I created my HOWTO in PDF format and made it available here:
HOWTO: Add Rear Window and Tailgate Controls to Cargo Area.
Please add it to your list if you think it'll help others. Cheers!

Dude this is awesome work! Thanks for making this and sharing! The text over the image is a great detail and very organized! The PDF is a great way to share and I added it in both the Interior and the Camping sections, as it ties into both

I believe you need 10 posts in order to start a thread, so pitching in with some awesome info like this is a great way to build up some post history! As an aside too, the forum is a tad weird at picture uploading if you ever make a pic heavy thread. I use Imgur to embed images in the post. I think it helps to keep it organized and to select appropriate large or small images depending on the occasion. A bit of an explanation here: https://www.toyota-4runner.org/3587207-post17.html. You don't have to use this method, just the way I found useful for me.
 
Sorry if I missed it. But has anyone found any good motor mount replacement write ups? Didn't see any in the list and searching hasn't provided much help either. My bad if I missed it!
 
Sorry if I missed it. But has anyone found any good motor mount replacement write ups? Didn't see any in the list and searching hasn't provided much help either. My bad if I missed it!

No sweat, unfortunately I don't believe I've seen or saved anything on the motor mounts for the 4th gens. I can look and try to find any I may have missed, and if you find anything, I'd be happy to include it here!
 
No sweat, unfortunately I don't believe I've seen or saved anything on the motor mounts for the 4th gens. I can look and try to find any I may have missed, and if you find anything, I'd be happy to include it here!

So you're saying there's a need huh? Haha. I'll see how the process goes this weekend and see if I can put anything together myself I suppose.
 
So you're saying there's a need huh? Haha. I'll see how the process goes this weekend and see if I can put anything together myself I suppose.

Hey that would be awesome dude! I and other members here would really benefit from some documentation!

Let me know if you get stuck uploading pics to the forum, its kind of wack. I use this method: https://www.toyota-4runner.org/3587207-post17.html, but you can also upload them as attachments here too
 
Marking this for future use! As a new T4R owner, I am going to find this of great use!

<a id="4wdthings">Transfer Case, Differentials, and 4wd Components</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#jump" >Return to Directory</a>
Quick Links: <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#tcase" >Transfer Case</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#frontdiff" >Front Differential</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#cv" >CV Axles</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#reardiff" >Rear Differential and Axle</a>

<a id="tcase">Transfer Case</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#4wdthings" >Return to Subtopic</a>

<a id="frontdiff">Front Differential</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#4wdthings" >Return to Subtopic</a>

<a id="cv">CV Axles</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#4wdthings" >Return to Subtopic</a>

<a id="reardiff">Rear Differential and Axle</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#4wdthings" >Return to Subtopic</a>

---
<a id="suspension">Suspension, Wheels, Tires</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#jump" >Return to Directory</a>
Quick Links: <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#frontsuspension" >Front Suspension</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#rearsuspension" >Rear Suspension</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#suspensionhelp" >Helpful Suspension Links</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#tires" >Tires</a>

<a id="frontsuspension">Front Suspension</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#suspension" >Return to Subtopic</a>

<a id="rearsuspension">Rear Suspension</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#suspension" >Return to Subtopic</a>

<a id="suspensionhelp">Helpful Suspension Links</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#suspension" >Return to Subtopic</a>

<a id="tires">Wheels and Tires</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#suspension" >Return to Subtopic</a>

---
<a id="brakes">Brakes, Wheel Bearings, and Wheel Hub</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#jump" >Return to Directory</a>
Quick Links: <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#frontbrakes" >Front Brakes</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#rearbrakes" >Rear Brakes</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#wheelbearing" >Wheel Bearings, Hubs, and Lug Studs</a>

<a id="frontbrakes">Front Brakes</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#brakes" >Return to Subtopic</a>

<a id="rearbrakes">Rear Brakes</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#brakes" >Return to Subtopic</a>

<a id="wheelbearing">Wheel Bearings, Hubs, and Lug Studs</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#brakes" >Return to Subtopic</a>

---
<a id="steering">Steering</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#jump" >Return to Directory</a>

---
<a id="lights">Lighting and Electrical</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#jump" >Return to Directory</a>
Quick Links: <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#exlighting" >Exterior Lighting</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#intlighting" >Interior Lighting</a>, <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#electrical" >Electrical</a>

<a id="exlighting">Exterior Lighting</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#lights" >Return to Subtopic</a>

<a id="intlighting">Interior Lighting</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#lights" >Return to Subtopic</a>

<a id="electrical">Electrical</a> | <a target="_self" href="!289488!4th-gen-t4rs/289488-4th-gen-maintenance-tutorials-writeups-picture-threads.html#lights" >Return to Subtopic</a>
 
[MENTION=429038]y=mx+b[/MENTION] Not sure if this would fit into your directory but I have a link in my signature to my process of putting the factory E-locker from a 3rd gen into my 4th gen rear axle. 3rd gens are easy to find in junkyards where I'm from so the 3rd gen E-locker retrofit is a fairly easy and potentially cheap way to get a rear locker.
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,054
Members
248,016
Latest member
Advally Service

Trending content

Back
Top