FiReBReTHa
New member
I try to find all the details others miss, and include those. But then im failing to include the redundant pics haha. I need to get back to being 100% comprehensive!
Fire's Trooper 2014 Trail TE 4runner
- Thread starter FiReBReTHa
- Start date
I try to find all the details others miss, and include those. But then im failing to include the redundant pics haha. I need to get back to being 100% comprehensive!
FiReBReTHa
New member
by now you should be decent at plastidip coating so I didnt document that.
But essentially. I taped off everything as need be. Then I started coating the center and did 6 coats. I didnt come near the edge of where the tape line is.
I then sprayed heavy to the tape line and then quickly peeled off the blue tape to give it the sharp "cut" line
If you let the plastidip dry, when you pull the tape the plasti will come with it!
I wish I did a better job at taping off for a smoother line.
all done!
But essentially. I taped off everything as need be. Then I started coating the center and did 6 coats. I didnt come near the edge of where the tape line is.
I then sprayed heavy to the tape line and then quickly peeled off the blue tape to give it the sharp "cut" line
If you let the plastidip dry, when you pull the tape the plasti will come with it!
I wish I did a better job at taping off for a smoother line.
all done!
FiReBReTHa
New member
So after hearing about this fabulous feature I had to have it! Especially now that we are going into summer.
Toyota dealership was able to use their scan tool to activate it for me.
you press and hold it for the amount you want it to drop.
Toyota dealership was able to use their scan tool to activate it for me.
you press and hold it for the amount you want it to drop.
FiReBReTHa
New member
Install Vid here!
All TRD parts were sourced from;
www.partznet.com
the vacuum hose and wireloom I picked up local at carquest
Last edited:
FlightMedic303
New member
Install Vid here!
This may be a stupid question but where did you buy the TRD CAI? I've been searching all over and can't seem to find it..
FiReBReTHa
New member
I failed. I just edited that post.
All TRD parts were sourced from;
Genuine OEM Toyota Parts & Accessories | toyotapartznet.com
FiReBReTHa
New member
Got some pieces! Shiny and Chrome!
Bilstein Model Numbers
Bilstein 46-227294 6112 Series Suspension Kit
Bilstein 25-227611 Rear Shock Absorber
Sourced from https://www.facebook.com/chitown4x4/?fref=ts
Bilstein Model Numbers
Bilstein 46-227294 6112 Series Suspension Kit
Bilstein 25-227611 Rear Shock Absorber
Sourced from https://www.facebook.com/chitown4x4/?fref=ts
SnrDisregardo
New member
Nice build. I am farther south than you, but know the area. Can't wait to at least upgrade tires and shocks too.
JasonKoko
New member
by now you should be decent at plastidip coating so I didnt document that.
But essentially. I taped off everything as need be. Then I started coating the center and did 6 coats. I didnt come near the edge of where the tape line is.
I then sprayed heavy to the tape line and then quickly peeled off the blue tape to give it the sharp "cut" line
If you let the plastidip dry, when you pull the tape the plasti will come with it!
I wish I did a better job at taping off for a smoother line.
all done!
Beautiful!
I'll have to try your technique when I redo mine.
I plasti dipped mine but didn't think to save a thick coating on the edges for the very last. Genius!
How does the final finish look close up?
Sent from my iPhone using Tapatalk
jdtaylor42
New member
Great work so far. Love how you are doing write-ups as you go along. Write-ups take a lot of time and effort so I am sure many members here will appreciate the info as they do similar projects
FiReBReTHa
New member
Lift all done!
6112 Front Shocks Model: 46-227294
I set them at the Fourth Perch UP for hopeful "2.5" lift.
Spacer used on top of hat drivers side to level the truck
The Coils that are paired with the 6112's for the T4R are Eibach 620's
Bilstein 5160 Rear Part number: 25-227611
ARB OME-895E 2" Lift Springs
Stock
Front done, rears stock
Issues;
the rear bracket for mounting the resevoir came with a mounting bolt that was an allen, but made from some weak metal.
The bolt hole that was threaded in the frame had corrosion and ruined the screw. Thankfully I used vice grips and pulled it out.
Underneath the car where you mount the sliders or side step bars are some bolts that are used as fillers. They are self tapping and can help you clean up the threads.
completed
Side by side.
6112 Front Shocks Model: 46-227294
I set them at the Fourth Perch UP for hopeful "2.5" lift.
Spacer used on top of hat drivers side to level the truck
The Coils that are paired with the 6112's for the T4R are Eibach 620's
Bilstein 5160 Rear Part number: 25-227611
ARB OME-895E 2" Lift Springs
Stock
Front done, rears stock
Issues;
the rear bracket for mounting the resevoir came with a mounting bolt that was an allen, but made from some weak metal.
The bolt hole that was threaded in the frame had corrosion and ruined the screw. Thankfully I used vice grips and pulled it out.
Underneath the car where you mount the sliders or side step bars are some bolts that are used as fillers. They are self tapping and can help you clean up the threads.
completed
Side by side.
Last edited:
FiReBReTHa
New member
woops, forgot to post the Before After GIF
Nex tto pickup some cap covers!
http://www.toyota-4runner.org/2014873-post332.html
Nex tto pickup some cap covers!
http://www.toyota-4runner.org/2014873-post332.html
Last edited:
headpaneer
New member
Love the comparison gif.
Did I miss something regarding the rear lift? I don’t see mention of the springs you used.
Did I miss something regarding the rear lift? I don’t see mention of the springs you used.
Lightenup_bro
New member
I like how you did the hood, a reverse of what I did and it looks noice!
2nd Chance
New member
So what tires are planning to upgrade to and sooner or later I need to see this truck in person.
woops, forgot to post the Before After GIF
FiReBReTHa
New member
Adjusted the post! I used old man emu +2" Springs
Done and Done! just got back from install
Just let me know if youre ever travelling west, I am going east to villa park/83 tonight.FiReBReTHa
New member
Ok,
I needed me some rubber! I decided on the BFG Ko2s because of beaming feedback from here, and everyone at the Discount Tire I picked them up from that owned them.
I chose the 275/70/17 size because it was a step up, no issues with rubbing. and only would cause a .86mpg loss vs an estimated 1.72mpg overall loss from the 265s to 285s. Then the cost of replacement and initial cost were factors as well.
I started a thread to decide on white text out, or in.
I even then rolled out a wheel and snapped a couple of shots to help decide.
Right after rolling it out.
after getting home and snapped a couple more shots.
I needed me some rubber! I decided on the BFG Ko2s because of beaming feedback from here, and everyone at the Discount Tire I picked them up from that owned them.
I chose the 275/70/17 size because it was a step up, no issues with rubbing. and only would cause a .86mpg loss vs an estimated 1.72mpg overall loss from the 265s to 285s. Then the cost of replacement and initial cost were factors as well.
I started a thread to decide on white text out, or in.
I even then rolled out a wheel and snapped a couple of shots to help decide.
Right after rolling it out.
after getting home and snapped a couple more shots.
Last edited:
2nd Chance
New member
Truck looks fantastic and sorry I couldn't make it out last night as I had to pick my family up at Midway last night.
