Limited Edition Mod Thread

Blacked out most of the chrome. Looks way better black with the lift and wheels.
43f03a3ee935271c914a117974b1ffe3.jpg



Sent from my iPhone using Tapatalk
 
Looks great [emoji1417] btw, what suspension do you have ?



Wanted to keep the factory xreas for the time being as i actually really like the ride of it coming from my bilstein’s on my trd. So i did the daystar 2.5/1.5 and it netted spot on to 2.5/1.5


Sent from my iPhone using Tapatalk
 
Plastidip

Question for those guys who have dipped the chrome on the front bumper... any issues with pealing or chipping or anything? I'm stuck between cheap and easy dipping or having the chrome wrapped thinking it may last longer. Thanks!
 
Was the install of the trd pro grill super straight forward? Heard mixxed reviews for putting this on the limited and possibly needing trimming. Any thoughts?


Sent from my iPhone using Tapatalk

I used an aftermarket one not the OEM but it fit perfectly from side to side. At first I was worried about it falling off but it held well for over a month in rain/90 mph freeway speeds and the car wash. The Limited grille is not as tall so it essentially is just held with the tape on top, I don't think the tape on the front touches at all.
 
Question for those guys who have dipped the chrome on the front bumper... any issues with pealing or chipping or anything? I'm stuck between cheap and easy dipping or having the chrome wrapped thinking it may last longer. Thanks!



Just went thru this myself. Decided on a wrap, turned out poor. The edges on the fog lights didnt wanna stay in form and started to lift quick. Ended up pulling all the wrap and went plastidip and very happy with the results. Had the front grill on my trd dipped for 2 years and not one issue or chip.

Could have just been a poor wrap job or cheap vinyl the guy used but i wasnt very impressed at all. Was super easy to pull all the chrome bits off and spray them off the bumper to get all edge coverage to avoid lifting/peeling of the plastidip.
a83765e5f6483fc8710f0d9f33d37f01.jpg
94645ae83f75d0adda24674c48ae0cd6.jpg
15779e82da84e58248aefe6c567a1b3c.jpg



Sent from my iPhone using Tapatalk
 
I used an aftermarket one not the OEM but it fit perfectly from side to side. At first I was worried about it falling off but it held well for over a month in rain/90 mph freeway speeds and the car wash. The Limited grille is not as tall so it essentially is just held with the tape on top, I don't think the tape on the front touches at all.



Good to know. Thanks for the reply. This may be my next mod


Sent from my iPhone using Tapatalk
 
Was the install of the trd pro grill super straight forward? Heard mixxed reviews for putting this on the limited and possibly needing trimming. Any thoughts?


Sent from my iPhone using Tapatalk


I just followed the directions with re-taping the chrome piece. The contact points on the plastic part line up differently for the limited. Refer to one of my recent posts on how to tape.
 
Installed the Accessorides remote start and front/rear dash cams last night.

I was surprised how easy the install was for the remote start. Was nice coming out to a warmed up car this morning.
 
15 Limited 4Runner

15 Limited w/ Hefty Fabworks front and rear bumpers as well as rock rails. 180 awning, 3" Toytec 2.5 Boss Suspension, SPC UCAs, BFG K02s 285/70/17s. Lastly, Gobi stealth rack.
 

Attachments

  • IMG_2245 (1).jpg
    IMG_2245 (1).jpg
    137.5 KB · Views: 2,619
2.5 daystar lift/level, 1” body lift, bmc, 285/75/17 BFG K02, SCS F5, TRD Pro grill, and some fun dip
 

Attachments

  • D040AF7A-FD19-4CE5-B88F-562825462EC2.jpg
    D040AF7A-FD19-4CE5-B88F-562825462EC2.jpg
    135.5 KB · Views: 2,590
  • 6766BBFE-858B-4DE4-9975-6E568D6391CA.jpg
    6766BBFE-858B-4DE4-9975-6E568D6391CA.jpg
    135 KB · Views: 2,580
I haven’t figured out what the gas mileage is now but it has dropped. The 285’s felt heavier but overall I am happy that I went with the bigger size. The lift did add to it driving a bit dodgy but that can be corrected with UCA’s. I have a set of Camburg with the ball joints I just haven’t had time to put them in.
 
Just ordered the TRD pro grill and also black door handle covers. Will update with pics once they are installed for anyone interested! My goal is to eventually do a complete nightshade conversion (minus the wheels of course)
 
Got my Dobinsons 300/700 599/705 installed today. XREAS is gone...and the ride has improved!
 

Attachments

  • IMG_2697.jpg
    IMG_2697.jpg
    138 KB · Views: 3,024

Members online

Forum statistics

Threads
278,309
Messages
3,554,066
Members
248,016
Latest member
Advally Service

Trending content

Back
Top