Official Classics Lift and Tire thread

[BrazilianT4R]

The original alloys.
I´m not sure which backspace those have.

 

[mikebontoft]

they should not rub with factory wheels. I have the 4.56 option with 31" tires from the factory.

 

[BrazilianT4R]

They didn't on the wheelwells but on the frame, when full steering.

 

[Geolander]

They didn't on the wheelwells but on the frame, when full steering.

That's weird. I've got 31x10.5s on mine with the stock alloys and they've never rubbed on anything.

 

[KidVermicious]

The original alloys.
I´m not sure which backspace those have.

That's crazy, I wonder if your steering stops were opened way up? Lots of people run 31s on all flavors of factory and aftermarket wheels with no rubbing anywhere.

 

[mikebontoft]

are you sure they were rubbing? I've ground through my plastic covers on the steering stops and full lock sounds horrible.

 

[BrazilianT4R]

Well, hard to figure it out now, as I have returned it to the previous tires. I will have to test it again in another oportunity.

Thanks folks for all the advice.

 

[Surf89]

Am I right in saying that due to the difference in axles between the leaf 1st gen to the ifs 1st gen that 10.5 inch tyres would stick out of the latter but be still inside the wheel well of the former ?

 

[Jeramy]

95 4runner auto
31" big O BF :boxing:

 

[Surf89]

Does anyone know if these wheels are stock ?

 

[KidVermicious]

Am I right in saying that due to the difference in axles between the leaf 1st gen to the ifs 1st gen that 10.5 inch tyres would stick out of the latter but be still inside the wheel well of the former ?

Depends on the backspace of the wheel. The IFS setup is 1.5 inches wider on each side.

 

[Surf89]

Cheers

 

[ajohnson]

Trail Gear 4" springs flexing

 

[thatoneguy]

^ Nice. Hopefully my TG 4 inchers do that well!

Question. I just put Chev 63's with 3" blocks in the back of my runner. What's a good shock to go with? It's on Bilsteins up front. Preferably something affordable.

 

[ajohnson]

^ Nice. Hopefully my TG 4 inchers do that well!

Question. I just put Chev 63's with 3" blocks in the back of my runner. What's a good shock to go with? It's on Bilsteins up front. Preferably something affordable.

Thanks.

I'm running bilstien 5125 12" in the stock location. You can get more travel with relocated mounts.

 

[thatoneguy]

Thanks.

I'm running bilstien 5125 12" in the stock location. You can get more travel with relocated mounts.

I'm wondering if I wanna go triangulated in the back. I got Bilsteins in the front.

 

[Dj's-4Runner]

I'm looking at new tires and I found some General Grabber
Off roads for cheap. Has anyone had these and are they any good?

 

[ajordan1975]

4" springs, 37x14x16.5 Iroks on recentered H1 wheels

 

[BaseRunner]

Heres mine, stock everything and no lift (at least not that I know of) and 31-10.50s. I'm wondering if I can fit 33s without a problem? Can any of you experts tell from the picture? if not, then would 32s look meaner and bigger then the 31s I have on there? hmm?!

 

[fj40er]