Post your LIFTED pix here!

[Mr. Feeny]

Looks sick bro!! I'am just going to leave the spacers off for now. Can you take pics of your front bumper trim so i can do mines ahead of time... Hawaii FTW!!!


Sent from my iPhone using Tapatalk

Only the fender liner was moved forward, no trimming of the bumper. Let me know if you still want pictures of the liner.

 

[KalihiRunner]

Only the fender liner was moved forward, no trimming of the bumper. Let me know if you still want pictures of the liner.

Pictures are always help full thanks!!


Sent from my iPhone using Tapatalk

 

[WI4Runnin]

The spacers will ride more like stock depending how big of spacers and if you go preload or top out . These trucks are VERY capable in stock form and the spacer allows for bigger tires (if you want to do that) and good under belly clearance. My Last TE was built up with Toytec Ult. kit. This time Im going to do spacers only. Gives it a nice stance and it will be able to handle anything I'm going to throw at it I'm sure.

 

[KalihiRunner]

Only the fender liner was moved forward, no trimming of the bumper. Let me know if you still want pictures of the liner.

Did you try take it off road yet? Wonder if it will rub then


Sent from my iPhone using Tapatalk

 

[mfregeau20]

Here's our 2016 Trail.

3" lift:
Icon 2.5 Coil Over Front struts
Icon upper A-Arms
Fox 2.0 Resevoir Rear shocks
Icon Rear Coils
Icon Rear Trac Bar
BFG All Terrain KO2 285/70R17
TRD 17" black wheels
and more.

What is the and more? specifically looking at the Sliders?

 

[20h4Runner]

Here's our 2016 Trail.

3" lift:
Icon 2.5 Coil Over Front struts
Icon upper A-Arms
Fox 2.0 Resevoir Rear shocks
Icon Rear Coils
Icon Rear Trac Bar
BFG All Terrain KO2 285/70R17
TRD 17" black wheels
and more.

Wow, just wow.

 

[Mr. Feeny]

Did you try take it off road yet? Wonder if it will rub then


Sent from my iPhone using Tapatalk

Haven't gone off road yet, but I imagine that it will rub quite a bit.

 

[ZeroT4R]

 

[Davidpsr5]

Installed 5100s with the fronts set at 1.75, 4Runner sets almost level with a 1/4in rake.
Super happy with how it came out, and it rides like a dream! [emoji5]

Sent from my iPhone using Tapatalk

Love this!

Do you think you could fit 285's with this setup?

 

[415T4R]

Love this!



Do you think you could fit 285's with this setup?

That might be pushing it. I think they will fit, but they would probably rub.


Sent from my iPhone using Tapatalk

 

[Khanhvu411]

 

[Ducseven]

What size wheel ad tire combo are you running? Lift size?

Look great!

 

[ZPT_Yoda]

Billy's all around, 285s KO2s.

Sent from my iPhone using Tapatalk

 

[KalihiRunner]

Phase 2 complete. Camburg UCA and trimmed my TRD plate to clear the new sway bar position.

Is this a 6inch lift? Did you add the front diff bracket? More pics the suspension please...


Sent from my iPad using Tapatalk

 

[20h4Runner]

My 16 SR5 Pavement pounder
ReadyLift 3/2"
17x7.5 KMC XD129
285/70/17 (lots of rub :sobbing


What do you guys think I need next?

 

[shrub1]

My 16 SR5 Pavement pounder
ReadyLift 3/2"
17x7.5 KMC XD129
285/70/17 (lots of rub :sobbing


What do you guys think I need next?

Fender liner trimming or BMC.

 

[20h4Runner]

Fender liner trimming or BMC.

What does BMC stand for?

 

[shrub1]

What does BMC stand for?

Body Mount Chop.
This measure my prove unnecessary as fender liner (perhaps bumper as well) trimming/pushing may be good enough (depending on your intended use of the vehicle).
Start with the latter and go from there.

 

[Magnetic4R]

What does BMC stand for?

Interesting wheels design.

 

[pbcolt]

OME and Camburg lift installed.