Damn really, I recently bought a '16 TEP and getting ideas for a lift. Mine me asking why you went with stock?
Post your LIFTED pix here!
- Thread starter B'klyn_Mike
- Start date
Damn really, I recently bought a '16 TEP and getting ideas for a lift. Mine me asking why you went with stock?
ds4runner
New member
Didn't see any reason for different ones since I don't have any extra weight up there. I only went 1.75" up front. It rides great.
Sent from my iPhone using Tapatalk
Thank you excuse my newbie questions, think I'm gonna go your route and run some 275/70/17's.
ds4runner
New member
No worries at all. I went w 255/75/17 (Rubicon take offs) since they can be found so cheap. I bought 5 for $450 that were practically brand new. Pretty much the same size as 275s.
Sent from my iPhone using Tapatalk
Does your front sit a little higher than the back?
ds4runner
New member
http://www.toyota-4runner.org/attachment.php?attachmentid=237157&stc=1&d=1486033776
http://www.toyota-4runner.org/attachment.php?attachmentid=237158&stc=1&d=1486033776
http://www.toyota-4runner.org/attachment.php?attachmentid=237160&stc=1&d=1486033776
http://www.toyota-4runner.org/attachment.php?attachmentid=237161&stc=1&d=1486033776
Icon stage 2 lift (3" lift) and White Knuckle Off Road sliders.
http://www.toyota-4runner.org/attachment.php?attachmentid=237158&stc=1&d=1486033776
http://www.toyota-4runner.org/attachment.php?attachmentid=237160&stc=1&d=1486033776
http://www.toyota-4runner.org/attachment.php?attachmentid=237161&stc=1&d=1486033776
Icon stage 2 lift (3" lift) and White Knuckle Off Road sliders.
Attachments
Had to lower the front, CV's looked ugly, lol. As it looks now, and ordered wheels, tires, and TRD caps yesterday. Nitto Ridge 285/70/17 C, & level 8 MK6 17x9 -12, Now the wait begins !
how to screenshot on windows 7
how to screenshot on windows 7
Last edited:
cmilviper
New member
Once again, looks awesome man!
TRDProCement
New member
Love those wheels man!
Man that looks good. What lift do you have, and what size tires?
I appreciate that!
Toytec/Bilstein 3" lift
LR UCAs
VTX Outlaw Wheels 17" -10 offset
BFG KO2 in 285/70r17
Had to do the fender liner mod and remove the mud flaps, no rubbing for daily driving, haven't had the chance to flex it yet.
Drives very well, a lot stiffer than stock which I prefer
Sent from my iPhone using Tapatalk
bofa
New member
Kind of a strange situation... dealer was supposed to install Daystar levelling kit but when I went to pick it up, they had installed the Pro Comp kit. At first i was a little pissed, but I thought about it and since it's a top spacer kit, Im okay with it, especially since they were able to align it and they ate the difference in cost.
First pic is with the pitiful stock wheels/tires and second is my new setup.
First pic is with the pitiful stock wheels/tires and second is my new setup.
Attachments
Lift, wheels & tires done, waiting on TRD caps, want to level it out a little better, but it's getting there.
picture hosting
picture hosting
Did the measurements before and after the lift and it ended up 3" in the front as well as 3" in the back. After the springs settled, it has just a slight raked so it's not exactly leveled. I did just have a 2" lift from the rear which is not the overland springs. I believe the overland springs are a 3" lift. Hope that helps.
