2014 Trail Rocker Trim

[AnthonyMV]

Right flare

Put weather stripping on edge
Was short with the blue clips. So I used white ones left over from the rocker removal. Used 3M double sided heavy duty grey tape to attach rubber flare insert and a few left over screw clips I had

 

[AnthonyMV]

Job done

I like the look
Very streamlined with the slimmer rocker
Happy times

 

[AnthonyMV]

Other side

Right/rear view
Sorry about the sideways view

 

[Nathan.whitmire]

I like the look
Very streamlined with the slimmer rocker
Happy times

This looks great! I have a 2016 limited, have only had it 3 weeks now. I have been shopping for rock sliders that double as a step. I really like the shrockworks but will have to change the rocker trim or cut it. I'm very interested in what you have done here. I have asked shrockworks for more info on the TE trim piece they they are selling but am still waiting for the response. My concern is that it will not look good. I really want to keep things looking nice and not rigged up.

I just wanted to confirm what you had to change.

1. Flair trim on each back door (not the entire flair)
2. End caps for the flair at the flair on the front and the rear
3. The rocker moldings (both sides)

Is this correct? Or was there more? Do you happen to know any one who has used the shrockworks TR trim piece?

Thanks.

 

[Mistaken]

Looks great!

 

[AnthonyMV]

Thanks
What had to get changed was the 1-rocker panel 2-lower trim molding beneath the front 1/4 panel flare 3-rear door flare .....and to be honest 2014 TE front mud flaps finish the job up real nice
Good luck !

This looks great! I have a 2016 limited, have only had it 3 weeks now. I have been shopping for rock sliders that double as a step. I really like the shrockworks but will have to change the rocker trim or cut it. I'm very interested in what you have done here. I have asked shrockworks for more info on the TE trim piece they they are selling but am still waiting for the response. My concern is that it will not look good. I really want to keep things looking nice and not rigged up.

I just wanted to confirm what you had to change.

1. Flair trim on each back door (not the entire flair)
2. End caps for the flair at the flair on the front and the rear
3. The rocker moldings (both sides)

Is this correct? Or was there more? Do you happen to know any one who has used the shrockworks TR trim piece?

Thanks.

 

[Nathan.whitmire]

Thanks
What had to get changed was the 1-rocker panel 2-lower trim molding beneath the front 1/4 panel flare 3-rear door flare .....and to be honest 2014 TE front mud flaps finish the job up real nice
Good luck !

Thanks for the reply. Do you know if this is the proper mud flap kit? Mudguards Kit Front & Back Black 10-16 4Runner Without Ground Effects Kit

I'm going to try and get my parts list and pricking together later so I can get the project started.

 

[Magnetic4R]

That looks like for the limited or 10-13 sr5

 

[AnthonyMV]

Re:mud flaps

Thanks for the reply. Do you know if this is the proper mud flap kit? Mudguards Kit Front & Back Black 10-16 4Runner Without Ground Effects Kit

I'm going to try and get my parts list and pricking together later so I can get the project started.

The ones I ordered are for a 2014 TE, I have a 2012 SR-5
Part # 76621-35150 and 76622-35150
Also IIRC permalink #83 page 6 of this thread has all the part #s that I used for my 2012 SR-5

 

[N2GLOCK]

Had to satisfy the OCD in me. Just got my ride back from the body shop. I had the rear door flares painted and installed and while it was there I had the dent on the r/f fender repaired. As far as the flares & rockers go, everything lines up as it should and I'm happy!

 

[bwright]

Am I missing why everyone is steering away from the Shrockworks trim?

 

[Jhalko]

Am I missing why everyone is steering away from the Shrockworks trim?

It rusts once scratched.

 

[2nd Chance]

Am I missing why everyone is steering away from the Shrockworks trim?

Plus I like the idea of as much OEM stuff as possible. Fit & Finish is so much better.

 

[bwright]

Parts?

Does this parts list look right? The quote is way more than I see most of you have spent.

 

[bwright]

Well, went to pick up my SR5 rear bumper at the dealer and decide to order these side rockers. There's goes $400. =/

Do you have your invoice from Toyota that you could snap a picture of? See my post above - I can't tell if it's the right list that the guy gave me yesterday.

 

[rainmn]

You are getting royally screwed on those prices, not to mention I don't know what some of the parts even are. Did you order splashguards too?

Here's my part list and pricing from Toyota Partznet. Note that I didn't order splashguards....just the rockers and endcaps. The free t-shirt is also not required for install.

 

[bwright]

You are getting royally screwed on those prices, not to mention I don't know what some of the parts even are. Did you order splashguards too?

Here's my part list and pricing from Toyota Partznet. Note that I didn't order splashguards....just the rockers and endcaps. The free t-shirt is also not required for install.

I love the $0.01 t-shirt addition. Sweet deal!
To be honest, I was in a hurry and didn't take a lot of time with the guy. I walked him through it the best I could but they were busy with inventory and I didn't have the patience. I cross referenced some of the numbers with others posted and they don't match up...

 

[Magnetic4R]

Do you have your invoice from Toyota that you could snap a picture of? See my post above - I can't tell if it's the right list that the guy gave me yesterday.

only order the rockers and no endocarps but pretty much what Rainmn listed

 

[bwright]

No end caps? Other than the rust on the shrocksworks piece, isn't that they advantage of OEM?

 

[rainmn]

No end caps? Other than the rust on the shrocksworks piece, isn't that they advantage of OEM?

The list I posted above included the front end caps. There are no rear end caps - they are molded into the rear of the new rocker trim.