No end caps? Other than the rust on the shrocksworks piece, isn't that they advantage of OEM?
I only ordered the rockers and front caps, I stopped noticing the rear doesn't line up a long time ago... It's still sealed.
Just yesterday I replaced the rocker trim on my 2015 limited with the slimmer SR5/Trail version and I'm very happy with the results. Front mud flaps for the LE do not work. The door flares just clean up and complete the look. Though, as a lot have said, they're not necessary and you might just get used to the way they look. I'll go snap a pic so you can see the "after".I have read and re read this thread, one final question: I have a 2016 limited, with the front mud flap/splash guards. So if I get get the TE black rocker panels and end caps, they will fit nicely as a replacement for the limited rockers? I have no idea what the door flares are for.
I have read and re read this thread, one final question: I have a 2016 limited, with the front mud flap/splash guards. So if I get get the TE black rocker panels and end caps, they will fit nicely as a replacement for the limited rockers? I have no idea what the door flares are for.
2015 LE - SR5/Trail rocker trim pics
Here is a list of what I used. I currently had the mudguards and wanted them after I changed out the rocker so I ordered them as well. I went with the replacement oem parts instead of the shrockworks trim because I wanted to be able to use factory mudguards and I wanted a finished look even with the doors open.
2014 front trim covers
- 75857-35010
- 75858-35010
10-13 Rocker panels
- 75806-35100
- 75805-35130
The 2014 SR5/trail front Mudguards part numbers are:
- 76621-35150
- 76622-35150
To get the back flare of the rocker to line up with the door trim you will need to get the rear door trim pieces for the 2014 trail/sr5. I did not get them at this point to save money. They come smooth and would need to be painted to match.
- 75741-35901
- 75742-35901
[MENTION=97134]IronManKansas[/MENTION]
Ill probably follow this mod to the T but I wanted to ask why you went about using 2014 trim covers vs. using that same year for the rocker panels?
if anyone could provide more insight on this mod and their experiences, that would be appreciated.