Another Bilstein 5100 question

I'm thinking about doing the Bilstein 5100's all around but the rears are currently on backorder so I can only do the front for now and then in two months I can do the rear.

My question is, should I do 285/70/17 or 275/70/17? I want to increase my ground clearance more than anything because I have KDSS and my front skid plate scrapes too often as a result. How high do I need to adjust the front to clear 285's? If I leave the rear alone for now can I keep the fronts set at .85 and still clear without major rubbing?

I am also planning on installing total chaos UCA's.

I'm a complete novice when it comes to lifts in general. This will be my first time modifying any vehicle so I'm having the local dealership do it. I just want to do it right the first time.
 
williamlv282 said:
I'm thinking about doing the Bilstein 5100's all around but the rears are currently on backorder so I can only do the front for now and then in two months I can do the rear.

My question is, should I do 285/70/17 or 275/70/17? I want to increase my ground clearance more than anything because I have KDSS and my front skid plate scrapes too often as a result. How high do I need to adjust the front to clear 285's? If I leave the rear alone for now can I keep the fronts set at .85 and still clear without major rubbing?

I am also planning on installing total chaos UCA's.

I'm a complete novice when it comes to lifts in general. This will be my first time modifying any vehicle so I'm having the local dealership do it. I just want to do it right the first time.
Click to expand...
In Stock?

https://www.amazon.com/gp/product/B...e=as2&tag=thblwhli-20&linkId=4ELP2JIUPGWWY4KN
 
Yoderguy said:
Nothing in the ad says it's for the set, does it? I hope I'm wrong, but clarify if you can.
Click to expand...



I don't see anything that says SET or PAIR. But you can call them up and ask, very friendly customer service. 1-888-244-6166 good luck!


Sent from my iPhone using Tapatalk
 
NutZac said:
I don't see anything that says SET or PAIR. But you can call them up and ask, very friendly customer service. 1-888-244-6166 good luck!
Sent from my iPhone using Tapatalk
Click to expand...

I sent them an email since they're closed today but they're local to me anyway so I might just swing by Monday and ask. If I only get one, maybe they'll match the Amazon price for the second shock.

I also ordered a Daystar 1.5" spacer on Amazon
 
OME 2895E rear 2" coils and front 5100's set to 1.75. This is the rake I have with that setup. I love it but I want to move the fronts up to 2.5.
fc062bd806f7171d14130067ae4bb89d.jpg
d78a3264d98c408af6ef02baf345db2c.jpg
6c7caf4963e1b82a15e3e76143d55648.jpg


Also, the 5100/OME coils do some decent flexing.
6dc2fa37f865a9b2942e46c9c899b372.png
dd9fced8f09d273a022d18223d6d5d3d.png



Sent from my iPhone using Tapatalk
 
kingofZroad said:
Yesterday I had my Bilstein 5100's installed. I went with the 2.5" setting up front and added a Daystar 1.5" spacer in the rear. Ditched the stock Dunflop tires for 275/70R17 KO2's.

MAJOR improvement in looks and ride quality!! No more major nose dive during breaking and it soaks up bumps better. Absolutely zero rub and I get to leave the mud flaps on!

I was worried about it looking "goofy" with that amount of lift on 275's, but I actually love the look!!

1af0684a000d35bd795889e1d7264c3d.jpg
Click to expand...
This has probably been asked before...but at 2.5 inches up from are you running the stock coils? I'm planning on ordering a set of 5100s and setting at 2.5" front with 1.5" Daystar in the rear also.
 
Spacer

ATLQuicksilver said:
I'm really enjoying my 4Runner so far. I've been looking around on the forum if I need spacers in the rear if I install 5100's in the front and back. I know that there are millions of comments out there about it but I can't seem to find it. Can someone help me or point me in the right direction of where to find the information. Also, what will be the best height to set them for a DD and a little bit of off-roading. I want a little lift and I'm thinking around 1.75 all around.


Thanks
Click to expand...

What part number did you use for the rear daystar spacer? I have a 2016 sr5p and would like to get the same set up but I don't see just the rear available.
 
ds4runner said:
What part number did you use for the rear daystar spacer? I have a 2016 sr5p and would like to get the same set up but I don't see just the rear available.
Click to expand...

Assuming he used the same spacer I used for the rear, it is: Daystar KT09127BK Comfort Ride 1.5" Rear Coil Spring Spacer Kit
 
You must log in or register to reply here.

Similar threads

M
Bilstein 5100s on 2016 Limited (removing XREAS)
Replies
1
Views
1K
MZ2215
M
A
4th gen Trun signal relay with DRL
Replies
3
Views
1K
inscarguy
inscarguy
H
Eibach pro truck or Bilstein 5100 for SR5 for road use and stock height
Replies
4
Views
3K
johnnygraphic
J
axel1
2014 Engine Toast - Rebuild vs Replace
2
Replies
34
Views
5K
axel1
axel1
O
2011 Trai w/KDSS Leveling kit advice
Replies
3
Views
4K
progress4m
progress4m

Members online

Total: 267 (members: 5, guests: 262)

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top