any way to exchange or retrofit with the springs I have?
kit remains unopened currently.
Eibach Pro-truck lift
- Thread starter f-it
- Start date
any way to exchange or retrofit with the springs I have?
kit remains unopened currently.
nickpsomas
New member
Unfortunately not because the springs must be ground flat top and bottom to work with the adjustable rear setup.
Like Ryan said best bet is to sell them and buy the kit by itself
Rear Height Adjuster [10+ 4-Runner] – Peak Suspension
nickpsomas
New member
The 200lb/in spring will get you 0 .50"- 2.00" of lift unloaded.
ForRun
New member
Awesome, thanks! I saw that link had a bundled set with shocks. Will that be available on Eibachs site? Or is that an eibach company
nickpsomas
New member
Should be on Eibach's site soon, but not sure when. They are available for order from us today. We are close with Eibach and a direct dealer for them.
Ryan,
Any benefit to using those massive axle bump stocks with my Level 1 kit?
Thanks
Ryan at Eibach
New member
Peep the new thread for the adjustable rears!
Eibach Load Leveling System (aka height adjustable rear)
Eibach Load Leveling System (aka height adjustable rear)
Awesome!!! Thank You.
Ryan at Eibach
New member
The bump stops are progressive, which is nice.
Akkording
Member
Ryan any updates on the Eibach front progressive bump stops you mentioned before in another thread last year?
I made an order this morning on the rear bumps stop you guys just came out with.
So not quite the pro kit, but mostly Eibach parts so thought I’d share! Finally pulled the trigger. Eibach Pro shocks all around, fronts assembled with Wheelers (Eibach) T1 springs, rear coils are OME 2985E. Should be good for 2.5” front and 2” rear. I tow a boat often in the summer, and was concerned with reverse rake, so I pieced together my own budget setup. I’ll follow up with pictures this weekend as some 285s are also going on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Ryan at Eibach
New member
Pics after install 
Pics after install
Absolutely! Also caved and bought 285s lol. Hopefully they fit with no issues. Got lucky with 5 KO2s off a Jeep with 4K miles for $700.
Sent from my iPhone using Tapatalk
dillbigglesworth
New member
So not quite the pro kit, but mostly Eibach parts so thought I’d share! Finally pulled the trigger. Eibach Pro shocks all around, fronts assembled with Wheelers (Eibach) T1 springs, rear coils are OME 2985E. Should be good for 2.5” front and 2” rear. I tow a boat often in the summer, and was concerned with reverse rake, so I pieced together my own budget setup. I’ll follow up with pictures this weekend as some 285s are also going on.
Sent from my iPhone using Tapatalk
Hi! The pro lift kit from eibach says it will give a 1" lift in the rear, which gives the truck a level look. With the OME springs you have does that keep the truck in it's OEM rack? I'm looking to swap out of rear eibach coils due to added weight that has it lean backwards now.
That’s why I pieced together my kit. The OME springs should give about 2” of lift. This would leave a .5” less rake than factory with a 2.5” front lift. (I think factory rake is about 1.5”, at least on my limited). It’s not installed yet but I’ll take a picture when I’m done, I’ll also take a picture with my 3500lbs boat hitched up.
Sent from my iPhone using Tapatalk
ForRun
New member
Similar threads
