Post your LIFTED pix here!

[DeepSea]

Recent

Some recent beach time here on Oahu with a buddy's Wrangler. If Jeeps were built better, I'd probably own another one.

 

[DeepSea]

Sweet, I think it's time to place the order. How much of a pain was the install? Looks like the bolts drop down from the top so I assume some interior panels have to be removed?

I did mine and it was a bit a PITA but worth it to help clear the 295s:

http://www.toyota-4runner.org/5th-gen-t4rs/236913-installed-1-body-lift.html

 

[2016 4Runner SR5]

I did mine and it was a bit a PITA but worth it to help clear the 295s:

http://www.toyota-4runner.org/5th-gen-t4rs/236913-installed-1-body-lift.html

I clear my 295s no problem, just looking for a little more lift is all.

 

[apollo]

back up and running

Sent from my iPhone using Tapatalk

 

[zoomin6]

Did mine yesterday after work. OME 3" with medium load springs up front and 285/70/17 Ridge Grapplers. Need to do a little trimming to the front bumper tomorrow and besides that she sits just perfect for my liking

Did you install UCA's? How do the medium coils in the front feel? Don't see you have any additional weight in the front atm.
I'll be installing RSG sliders when I get my 4Runner, so that will weigh it down a little.

I'm torn between this OME 3" or Bilstein 5100's with Toytech RCC2 Superflex 2" rear coils.

 

[4runnerJDB]

Looks perfect. This is the look I want. Wildpeaks? what was your before and after MPG? Where did you get the lift?

Hi and thanks! Yes, 285/70 wildpeaks. According to the 4runner computer, I was getting like 18.5 and now I'm getting like 17.2. Bought the spacers from Bateman who is on the forum.

 

[SR5Bart]

Did you install UCA's? How do the medium coils in the front feel? Don't see you have any additional weight in the front atm.
I'll be installing RSG sliders when I get my 4Runner, so that will weigh it down a little.

I'm torn between this OME 3" or Bilstein 5100's with Toytech RCC2 Superflex 2" rear coils.

I am still on the stock control arms and it aligned just fine. The medium coils are nice a little stiffer since there is not front bumper on her yet but ill be doing that around Christmas so I figured instead of swapping springs later on I will just put the mediums on from the get go. Overall I am happy I did this over the Bilsteins. My buddy has them and says he kind of wishes he did the OME kit and may swap down the road.

This kit is rougher than the Bilsteins so it will all depend on how you want her to ride.

 

[MilitiaMan]

Been lurking here for a long time. Have been dying to post a pic worthy of this epic thread.

Here's my rig! 2016 TEP!

Great pics everyone! Keep them coming!!!

Steve
MM

 

[Aznisegi]

Here's mine

 

[RedSled]

I have to say, all of these rigs look awsome, well except the ones with the jeeps in them (just kidding). I just love the way the runners look lifted with bigger tires, racks, sliders. Very nice.

 

[ABC4R]

Dobinsons C59-302 / C59-505, Bilstein 5100's

Thanks Mike

 

[ride16734]

Got lifted today at Toytec. Went with Pro 2" spacer with 2" springs in the back.
SPC upper was installed at the same time. Toytec guys did phenomenal job from install, mounting new tires, and alignment.

1) Pre lift
2)Pre lift with sliders
3)After lift with new tires.

 

[Aznisegi]

I'm about to add more to my lift. King triple bypasses and rear jounce bump stop shocks. Buahahaha

 

[Jimbo814]

added a few minor details

:bravo::hat:

 

[gdvan01]

:bravo::hat:

Looks good.

 

[FloridaFeMan]

:bravo::hat:

Love the red accents and the American flag decal.

The lift isn't too shabby either

 

[Jimbo814]

thanks

Thanks! FloridaFeMan & gdvan01

 

[transistor]

Before:

After:

1.5" cornfed spacers in front. Toytec HD 2.0 coils in back. The rear coils added more height than they claimed, but once I add more stuff to my drawers, I'm hoping it will drop a little more.

 

[Island4runnin]

Finally got her lifted! 3” Old Man EMU Front and Rear with JBA Off Road UCA’s

 

[Fireguy25]

After 50k miles and many other mods done I was finally able to get the suspension upgraded and some much needed ground clearance back. I am loving the ride and its ability to, what feels to me, "Float" over damn near anything and not jar me. Just an awesome suspension. I will update later with more pictures and final measurements once everything settles in. King OEM Performance Kit. Extended travel and tuned for weight on front with SPC arms. Rear is OME MED-Heavy +440lbs spring, custom length shocks and tuning with Toytec bump stop spacers.

Eventually I will put together a proper build thread and sorry for the rotation on the pics, I have no clue why its rotating them.