98EJ8’s 99 4Runner Build

98ej8

New member
Hi everyone I'm new here but have been around a couple 4runners and Toyotas for a bit.
Recently acquired a 99 SR5 that had an engine bay fire. Very clean outside and inside. 142k miles 5 speed.
Planning on rebuilding the engine but it needs basically everything in the bay replaced. Probably going to get a donor car to swap everything.
It has Rancho shocks and some yellow springs not sure what kind. Looks like lifted some haven't measured height yet.
Hoping to get help from everyone on here more knowledgeable than myself.
I apologize if this is posted in the wrong section mods.
Thanks!

IMG_8409.JPGIMG_8413.JPGIMG_8410.JPG
 

Attachments

  • IMG_8409.JPG
    IMG_8409.JPG
    104.7 KB · Views: 1,342
  • IMG_8413.JPG
    IMG_8413.JPG
    111.1 KB · Views: 1,347
  • IMG_8410.JPG
    IMG_8410.JPG
    76.9 KB · Views: 1,339
Last edited:
Register to hide this ad
1999 4Runner rebuild

IMG_8423.JPG

Prime suspect

IMG_8424.JPG
IMG_8425.JPG
IMG_8426.JPG
IMG_8427.JPG

Anybody know anything about the suspension I have on there?

IMG_8428.JPG

Also this thing sits behind the battery and the firewall and I have no idea what that is.
 

Attachments

  • IMG_8423.JPG
    IMG_8423.JPG
    69.8 KB · Views: 1,263
  • IMG_8424.JPG
    IMG_8424.JPG
    58 KB · Views: 1,262
  • IMG_8425.JPG
    IMG_8425.JPG
    76.1 KB · Views: 1,259
  • IMG_8426.JPG
    IMG_8426.JPG
    65.6 KB · Views: 1,257
  • IMG_8427.JPG
    IMG_8427.JPG
    89.8 KB · Views: 1,259
  • IMG_8428.JPG
    IMG_8428.JPG
    67.4 KB · Views: 1,250
Last edited:
That looks like the remains of an EVAP canister to me. I don't if the 99 had it there though. Did this vehicle suffer from fire damage?

Sent from my SM-G930T using Tapatalk
 
That looks like the remains of an EVAP canister to me. I don't if the 99 had it there though. Did this vehicle suffer from fire damage?

Sent from my SM-G930T using Tapatalk



It had a thin filter element on top of the mesh. Yes the engine bay had a fire.
 
Damn quite the project but good on your for tackling it!



Thank you. I was looking for a runner with a clean body and a 5 speed and lucked out on this one. I prefer to do engine repair versus body repair. Although burn damage is a first for me and this one will need everything in the bay replaced. Hopefully it won't take too long.
 
Haven't found one yet.
I dont know if I can say that I'm good with wiring lol but I'll just be replacing basically all the harnesses affected by the heat, won't be trying to fix them. Plus they're all cut up by now [emoji23]
 
Not worth it- you will regret it- why do you think the insurance co. totaled it.
To many unburned 4runners out there to waste time and money on this one.
 
Haven't found one yet.
I dont know if I can say that I'm good with wiring lol but I'll just be replacing basically all the harnesses affected by the heat, won't be trying to fix them. Plus they're all cut up by now [emoji23]

if you find a donor you can use the harness from that. Probably stating the obvious but this would not be a project anyone would do unless they had a parts truck because replacing the things you need to replace with new would be WAY too expensive. You are really going to be up against it trying to fix the harness especially with all the melted plugs and sensors and everything. honestly, i wouldn't even start without a viable donor.
 
1999 4Runner rebuild

[MENTION=129567]Makitso[/MENTION] it's worth it for me I got a super clean car in and out for a good price and I'm pretty familiar with these cars that's why I'm tackling this project. Not my first rodeo. Sorry don't mean to sound rash. [MENTION=107674]JRZEE2000TR4LTD[/MENTION] not buying anything new except what's necessary. Currently looking for donor cars. Dads planning on buying a Runner with body damage so we're buying a donor to share lol
 
Last edited:

Members online

Forum statistics

Threads
278,309
Messages
3,554,075
Members
248,016
Latest member
Advally Service

Trending content

Back
Top