JBL Sub Replacement

dmalis12 said:
Can you comment or show what wires are + and - for reference.?
Click to expand...

Here are pics of the two proprietary(?) connections you will find inside the sub box. The Yellow and Green wires appear to be labeled as Negative.
 

Attachments

  • IMAG0070.jpg
    IMAG0070.jpg
    127.1 KB · Views: 4,624
  • IMAG0073.jpg
    IMAG0073.jpg
    102.3 KB · Views: 4,786
sbbrown333 said:
As far as the wiring for the Fosgate sub, did you just plug it in, or did you run new wiring.
Click to expand...

Please if you can respond today as I have the car torn apart to access the subwoofer, did you have to drill your own holes into the enclosure? The Rockford Fosgate sub does not line up with stock holes.
 
sbbrown333 said:
Please if you can respond today as I have the car torn apart to access the subwoofer, did you have to drill your own holes into the enclosure? The Rockford Fosgate sub does not line up with stock holes.
Click to expand...

I just made my own holes for the ones that didn't line up
IMAG1269.jpg~original
 
Can anyone in this thread that has used the stock JBL enclosure post a quick vid ~15-30 sec of the sound with the new sub (liftgate open standing at rear bumper)?

I'm trying to get a feel for the sub sound before replacing.

Edit: Doesn't need to be a bass test, just something with bass in it, for example:
Katy Perry - Dark Horse
Chris Brown - Love More
Far East Movement - Like a G6
Usher - Yeah
Anything hip-pop (Ludacris, etc,)
whatever you got... Doesn't have to be Magic Mike from 1990 or anything. :)


Much appreciated.
 
Last edited:
JB40 said:
Can anyone in this thread that has used the stock JBL enclosure post a quick vid ~15-30 sec of the sound with the new sub (liftgate open standing at rear bumper)?

I'm trying to get a feel for the sub sound before replacing.
Click to expand...
I don't know what good a video would do you, but my JL 8W1 powdered by an Alpine M250 (150w rms at 4 ohm) is a huge improvement over stock. It doesn't hit really low like a 10 or 12,bit it's a huge improvement.
 
Last edited:
seeking3rdgen said:
I don't know what good a video would do you, but my JL 8W1 powdered by an Alpine M250 (150w rms at 2 ohm) is a huge improvement over stock. It doesn't hit really low like a 10 or 12,bit it's a huge improvement.
Click to expand...

A video would do me a major amount of good in the distortion department.

Obviously it's going to sound like crap over a phone/camera mic, and that same mic won't pick up the same low frequencies, but nevertheless, I'd like to hear it.

There are a ton of sub videos out there, but not a single one of a replacement sub in the OEM JBL enclosure.
 
JB40 said:
A video would do me a major amount of good in the distortion department.

Obviously it's going to sound like crap over a phone/camera mic, and that same mic won't pick up the same low frequencies, but nevertheless, I'd like to hear it.

There are a ton of sub videos out there, but not a single one of a replacement sub in the OEM JBL enclosure.
Click to expand...

There will be vibes. I matted (raammat) and foamed (PS Ensolite) the whole sub enclosure area of the cab as well as the rear door. i'm still hunting down a few more rattles. i sometimes get vibe in the opposite side of the cargo area (no mat or foam yet) and have some vibe in the rear bumper trim piece. Oh, and the speaker grill vibeds just a little bit... I matted part of it, but now i'm thinking about foaming all of its contact points.

I hope this helps you. I doubt any of my rattles would be very noticeable on my phone.
 
You must log in or register to reply here.

Members online

Total: 213 (members: 1, guests: 212)

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top