Post your LIFTED pix here!

[snitz427]

What's the garage height? I'm moving into an apartment in April with a 6' 8" height limit which should be enough for the no-rise Gobi I ordered but if I lift mine it won't be more than 1" in the rear (if at all) so I'm not too concerned. But I'll definitely be getting close at that point.

Mine staggers. It starts at 6'10", then drops to 6'7" and then to 6'5". I'll be in the 6'7" area, but I'm not 100% sure their measurements are accurate. That was the clearance before they changed the lighting, which hangs even lower!!

Even though I literally said I can't lift this morning, I just saw and jumped on the TRD PRO kit in another thread. People are saying between .75 - 1" of lift on that. So I'm going to put that on, then the Gobi and see where I am at for tires. I only want to go 275s, so it'll be REALLY close to the max height, if not slightly over. Maybe I need to get up 2 hours earlier to get a parking spot on the 6'10" floor. :Cry:

 

[gdvan01]

One of a kind!!!

I love chicks with big lifts...

 

[BigEyeDuck]

2" Icon Stage 3 Lift

 

[2016 4Runner SR5]

Do you personally run the ultimate? I'm looking at purchasing it but I'm stuck between the Boss and Ultimate. Although it kinda sounds like the ultimate is a bit more "user friendly" no? Lol

Sent from my SM-G955U using Tapatalk

Yes, have had it for about 10 months and 7500 miles, no complaints at all. Just add a 3/4" spacer to the back if you plan on going 3" up front to avoid negative rake. Below are pictures without the rear spacer and with. The rear end squat drove me crazy.

 

[mimcementpro83]

Yes, have had it for about 10 months and 7500 miles, no complaints at all. Just add a 3/4" spacer to the back if you plan on going 3" up front to avoid negative rake. Below are pictures without the rear spacer and with. The rear end squat drove me crazy.

Do you have any side pictures like this with your Nitto RG 295s? Thanks

 

[2016 4Runner SR5]

Do you have any side pictures like this with your Nitto RG 295s? Thanks

In those pictures I had the BFG KO2 which I swapped out pretty fast for the RG Here's a couple pictures.

 

[mimcementpro83]

In those pictures I had the BFG KO2 which I swapped out pretty fast for the RG Here's a couple pictures.

Thanks, but I have seen those pictures before haha. Just hoping you would have some straight side pix just like the ones with the KO2s.

 

[2016 4Runner SR5]

Thanks, but I have seen those pictures before haha. Just hoping you would have some straight side pix just like the ones with the KO2s.

Not at the moment but i'll get some tomorrow. Shoot me a PM otherwise i'll lose the post and not be able to quote it so you see it lol

 

[tampaflygirl]

 

[BrandonF]

The Spring 2018 Coastal Offroad Group Buy is now live and you can find the full details at: http://www.toyota-4runner.org/group-buys/252166-coastal-offroad-spring-2018-group-buy.html

IMG_0173 by Brandon Faliszewski, on Flickr
IMG_0180 by Brandon Faliszewski, on Flickr

 

[cgrigsby79]

That looks amazing...build details?

Thanks,
Chris

 

[2014-4R]

Pretty excited to get this stuff on there!!!!

 

[4runnerJDB]

Pretty excited to get this stuff on there!!!!

Hell yeah, man. What's the kit?

 

[2014-4R]

Hell yeah, man. What's the kit?

JBA UCAs, 5100 fronts, Toytec 1/2" spacers, extended 5100 rears, Icon 2" springs.

 

[2016 4Runner SR5]

Anyone running these control arms? If so, what are your thoughts?

https://www.ebay.com/itm/Front-Uppe...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[whodat]

Been awhile since I've been on here!

 

[Colorado_T4R]

Stay Lifted

Wooooo! Couldn't wait to post in this thread.

Front Bilstein 5100 Shocks
Toytec Ultimate fully adjustable coilover
SPC UCA
Diff drop
Rear Bilstein 5100 shocks
2" OEM medium load rear coil
Toytec bumpstops
Pro Comp Predator 17" wheels
Duratrac 285/70R/17 tires

Did the install myself this past weekend. Front 100% alone and the rear I had some help for most of it!

Thinking about making a build thread with more pics and to answer any first-timers questions.

It's absolutely possible as a beginner to install yourself. definitely feel more comfortable working on the car in general as well.

 

[HeartGuy]

Wooooo! Couldn't wait to post in this thread.

Front Bilstein 5100 Shocks
Toytec Ultimate fully adjustable coilover
SPC UCA
Diff drop
Rear Bilstein 5100 shocks
2" OEM medium load rear coil
Toytec bumpstops
Pro Comp Predator 17" wheels
Duratrac 285/70R/17 tires

Did the install myself this past weekend. Front 100% alone and the rear I had some help for most of it!

Thinking about making a build thread with more pics and to answer any first-timers questions.

It's absolutely possible as a beginner to install yourself. definitely feel more comfortable working on the car in general as well.

Dang, and it can even climb vertically!!

 

[gdvan01]

Dang, and it can even climb vertically!!

New tires...

 

[4runnerJDB]

2"/1" Cornfed level on 285/70 FN F(x) Pro wheels