OK. Im gonna start to order the harnesses. Maybe Ill order the two harnesses above and see if I can get those to work instead of the TYTO...
oh heck yes! score on the unit, very excited to see if you can get it all to work out. Thanks for the update [MENTION=113957]MrRoo[/MENTION]!
i will be close behind you if you can get this to work!
oh, bummer, i was hoping you would be a guinea pig and figure out how to make it work without the TYTO harness.
No, you're right, it does not. However, that is why I thought that if you used the reverse harness and converted them that it *might* work. Many people on here have said that the JBL "amp" isn't really so much like a traditional amp, but more of a controller for the additional speakers (additional being those that you have over the standard non-JBL setup). Either way, I don't blame you for playing it safe and getting the stuff that you know will work.
The reverse harness includes the reverse signal from the transmission. It changes the screen to the camera.
No no no that's not what it is. It's a harness that reverses a male connector to a female connector. We could call it the Caitlyn Jenner harness if you'd likes
I have all my harnesses needed now for the FRS install with my JBL setup. Is there a good write up with some pics on which wires and harnesses go where and so forth? What gets soldered where? Sorry for the rookie questions. Just want to make sure i'm doing everything correct. I'm not doing backup camera and usb port for now. That will have to come in a few months. Christmas has me strapped for cash.