01-02 Owners PSA Brake M/C

[96RedRunner]

Brake M/C Assembly now $1100.00 at Olathe Toyota KC, MO. If your interested.

Price has me crying in my beer.
Aug of 21 I payed $2300.00, June 22 dropped to $1300.00 now $1100.00

That's my luck :hurt:

 

[162435]

Thank you for the post - that's good to know. There are always a few for sale on Ebay, but they're never cheap, and their history is a big question mark.


Andreas

 

[brillo_76]

This is why I have 1 in my parts pile. I know I try a used junk yard one before buying one.

Sent from my SM-A536V using Tapatalk

 

[96RedRunner]

This is why I have 1 in my parts pile. I know I try a used junk yard one before buying one.

I have one in parts pile now. lol. I'm good.

 

[brillo_76]

Those and the throttle body are definitely expensive in the 01 and 02.

Sent from my SM-A536V using Tapatalk

 

[shadow247]

Those and the throttle body are definitely expensive in the 01 and 02.

Sent from my SM-A536V using Tapatalk

I'm tempted to buy both just to have them ready for the eventual failure. Although it seems that they either last forever, or fail in the 200k range...

I'm at 210k, so I feel like I'm on borrowed time at this point.

 

[brillo_76]

I'm tempted to buy both just to have them ready for the eventual failure. Although it seems that they either last forever, or fail in the 200k range...



I'm at 210k, so I feel like I'm on borrowed time at this point.

If I find them in the junk yards I pull them as it's only a matter of tome before someone needs them.

Sent from my SM-A536V using Tapatalk

 

[shadow247]

If I find them in the junk yards I pull them as it's only a matter of tome before someone needs them.

Sent from my SM-A536V using Tapatalk

yeah they are gone before I can get there most of the time. I'm trying to buy a parts rig that has one for a motor swap project. Fingers crossed that works out.

 

[ToyotaBrah]

Good to know, thanks for sharing. I actually live down the road from them, and have noticed their prices are very competitive (Amayama beats them on certain parts even with shipping).
Have a junkyard special sitting in the garage should mine ever go out.

 

[96RedRunner]

My old one needs pump motor assembly, Reman price $450.00 last I looked doubt it's dropped in price.
Add in accumulator price all rubber parts price IIRC $650.00 all in your still left with partial rebuild using old control module.

After doing swap one n done enough for me.
It way more of a PITA getting air out of the new 4 chan system than old 3 chan when it's up high in system.

Zero chance of me doing it again without the SST Toyota had to design to service it, or figure out how to fire individual ABS channels.

 

[96RedRunner]

live down the road from them, and have noticed their prices are very competitive (Amayama beats them on certain parts even with shipping).

I've bought a lot from them since 17 Trans Screen en route $60 $10 shipping local $107.00.

 

[Kb1982]

Are these the parts I need based on...

A little off topic, my 2001 is making the exact same noise as the vehicle in this forum post (it's a Lexus forum), the video is in the first post.

Need help diagnosing buzz/noise - ClubLexus - Lexus Forum Discussion

 

[nissanh]

I did it on my 2000 Landcruiser. Very similar setup, but I did it without any electronic bleeding. A guy in Moldova did one to a prado and I followed his instructions. He knows what he is doing, and I got mine done. Yes, I will do again, if needed.

Here is the video: Follow the instructions.
Toyota Land Cruiser Prado ABS actuator replacement blinding testing - YouTube

 

[jgue467]

01-02 brake MS rebuild kits available

Don't forget there are Rebuild kits from Toyota available for 01-02s:

2001 Toyota 4Runner LIMITED 4WD Parts like master cylinder kit

How to:
Master Cylinder Rebuild - DIY | IH8MUD Forum

Luck all - my original part is still holding on at 340k, we'll see how the future hold out.

 

[brillo_76]

That's definitely a part I rebuild. That's for sure.

Sent from my SM-A536V using Tapatalk

 

[96RedRunner]

Follow the instructions.
Toyota Land Cruiser Prado ABS actuator replacement blinding testing -

Didn't know that vid was out, spot on how to do it an how I did it after figuring some things out.
No SST not doing it maybe extreme, wouldn't be gun Ho about it. lol.
My luck with this 01 has been chit, going new liked the odds.